Harbour 3.4 (from Viktor) 2014-29-06

Harbour 3.4 (from Viktor) 2014-29-06

Postby Antonio Linares » Sun Jun 29, 2014 6:26 am

The most recent Harbour 3.4 (developed by Viktor. Not in the official Harbour 3.2 repository):

Viktor's repository:
https://github.com/vszakats/harbour-core

https://bitbucket.org/fivetech/harbour-xharbour-builds/downloads/harbour_3.4_32bits_Borland582_20142906.zip

In order to test Harbour 3.4 this function has to be added to your app:

Code: Select all  Expand view
function hb_HSetCaseMatch( ... )

return hb_HCaseMatch( ... )
 

Here it is working very fine also :-)
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41206
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Re: Harbour 3.4 (from Viktor) 2014-29-06

Postby Antonio Linares » Sat Jul 05, 2014 2:21 pm

Info about Harbour 3.4:

https://raw.githubusercontent.com/vszakats/harbour-core/master/CONTRIBUTING.md

# Contributing to this fork of Harbour

# Table of Content

1. [How to Donate](#how-to-donate)
2. [How to Participate](#how-to-participate)
3. [Troubleshooting](#troubleshooting)

---

# How to Donate

You can donate to support the effort that goes into responding to issues.

* [PayPal](https://www.paypal.com/cgi-bin/webscr?c ... ZQYKXMQJYG)
* [Bitcoin](https://coinbase.com/checkouts/b90e7d84 ... ad186c3c36)


# How to Participate

- You can give feedback/suggestions by submitting an [issue](https://github.com/vszakats/harbour-core/issues/new).
- Submit a patch:
1. Fork the repository
2. Create a branch: `git checkout -b my_mod`
3. Do commit pre-check and new log entry: `hbrun bin/commit`
4. Commit your changes: `git commit -am "Added my feature"`
5. Push to the branch: `git push origin my_mod`
6. Open a Pull Request
- Make sure to use the same coding/formatting style as you find in
the files you're modifying. The easiest way to achieve this
is to use these commands to format the sources (use this
with care - most existing sources are well-formatted, so make
sure to only apply it to newly added or modified code sections)

$ uncrustify -c <harbour_dir>/bin/harbour.ucf <source(.c|.h)>
$ <harbour_dir>/bin/hbformat <source(.prg|.hb|.ch)>

- Text editor setting for Harbour files
- Encoding is either 7-bit ASCII or UTF-8 (without [BOM](https://en.wikipedia.org/wiki/Byte_order_mark))
- Use spaces, never tabs
- Remove trailing spaces from lines
- Keep one (not zero or multiple) newline at the end of file
- Use platform native newline (CRLF or LF)
- See this good guideline on how to contribute:
<https://github.com/necolas/issue-guidelines/blob/master/CONTRIBUTING.md>
- And this:
<https://guides.github.com/overviews/os-contributing/>
- You can also participate in localization:<br />
[![Localization Status](https://www.transifex.com/projects/p/ha ... /image_png)](https://www.transifex.com/projects/p/harbour/)


# Troubleshooting

Evaluate these points before reporting an issue:

1. Make sure to have carefully read this document.
2. Make sure to do a ``make clean`` before doing a build after refreshing
the sources.
3. If that still fails, make sure to install fresh source tree in a new
local directory and start over. See [How to Get](README.md#how-to-get)
for instructions to get the source.
In case you installed Harbour into system locations (this used to be
the case with some *nix users, albeit mostly completely unnecessarily
or wrongly - f.e. for unstable versions), you will need to remember
cleaning off Harbour from all of these locations, too.
Hint: Never install unstable Harbour versions to system locations.
4. If you are doing a cross-build, make sure to have rebuilt the native
Harbour executables for your host platform. See `HB_HOST_BIN`
build messages to find their location.
5. Keep your PATH clean from old, mixed compiler tools or other Harbour
versions when building Harbour. The surest way to achieve this is to
leave only the C compiler directory in PATH:

set PATH=C:\<c_compiler_bin_dir>

> If you use Harbour official binary distro on Windows, even above is
> unnecessary and not recommended.
6. Remove all old, unnecessary environment variables (for both Harbour
and C compiler) from your environment. Also remove any custom settings
for your C compiler.
Use only those documented in this file.
7. Remove any Harbour build settings documented in [Build Options](README.md#build-options).
8. Do no or only small modifications at once to the examples
included in [Build Examples](README.md#build-examples).
If it doesn't work, fall back to documented examples _as is_.
9. If everything fails and you are to report a build problem to Harbour
developers, make sure to include your OS version/language/CPU architecture,
Harbour revision, C compiler name/release and version, environment
variables and verbose log output containing **both stderr and stdout in
one combined stream** (use `make > log.txt 2>&1`). Enable verbose
mode using `HB_BUILD_VERBOSE=yes`. Preferably, configure your tools
to output English language messages.
Complete log output is rarely necessary, but make sure to include
the top of the output (lines starting with ``!``) and the area where
problematic behavior occurred _first_. Make sure to not only include
a link failure or a make tool failure, as it's most of the time not
enough information. Compress your log using zip if it is larger
than 25kB. (use the extension `.zip`)
With these, you have much better chance to get useful or any response.
10. Do not alter the directory layout and files in Harbour and 3rd party
packages.
11. If you are to report a build problem with a Harbour application,
all of the above points apply, plus make sure to use ``-trace``
command-line option when running hbmk2 and redirect the result to
a file (see above how). Also include your full command-line in your
report.
It's good idea to first remove all manual references to Harbour
core components from makefiles and custom environment. F.e. it's
commom mistake to add C compiler header and/or lib dirs, Harbour core
header and/or lib dirs, built-in constants to makefiles or environment.
No such thing is necessary as all of these are automatically handled
by hbmk2. IOW start simple and don't be overbusy with *fine-tuning*
your configuration. If you need to, the problem is most probably
elsewhere. It's also good idea to try with Harbour nightly binary or
official stable release first.
12. If you are to report a problem with Harbour itself, provide
self-contained, minimal source code example. Do not use xhb contrib
library, or any 3rd party Harbour libraries. The example shall reproduce
the problem using official stable or nightly Harbour build.
Do not post executables and other binary files. If your source contains
non-ASCII (national, accented, special) chars, make sure to mark the
codepage/encoding used (UTF-8 recommended) and attach the files
compressed with zip. (use the extension `.zip`)<br />
* See more on self-contained examples:
<http://sscce.org/>
* See more on how to report issues in an effective and useful way:
<http://www.chiark.greenend.org.uk/~sgtatham/bugs.html>
13. If your example or report contains any human readable text, use
English only.
14. If your example involves compatibility components, make sure to test
it against original implementation (for example, test legacy Clipper
core language elements against real CA-Clipper 5.2e or 5.3b, or hbct
functions against CT3 library, etc)


---
This document Copyright &copy;&nbsp;2009&ndash;2014 Viktor Szakáts (vszakats.net/harbour)<br />
Licensed under [Creative Commons Attribution-ShareAlike 4.0](https://creativecommons.org/licenses/by-sa/4.0/)<br />
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41206
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Re: Harbour 3.4 (from Viktor) 2014-29-06

Postby Antonio Linares » Sun Jul 13, 2014 10:36 am

From our apps, this is the right way to distinct between Harbour 3.2 and Harbour 3.4:

? __HARBOUR__ // -> 0x030400 vs. 0x030200
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41206
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Re: Harbour 3.4 (from Viktor) 2014-29-06

Postby AIDA » Sat Jul 19, 2014 3:39 am

Es el ultimo y es mejor que usar xharbour?


Saluditos :wink:
Que es mejor que programar? creo que nada :)
Atropellada pero aqui ando :P

I love Fivewin

séʌǝɹ ןɐ ɐʇsǝ opunɯ ǝʇsǝ
User avatar
AIDA
 
Posts: 877
Joined: Fri Jan 12, 2007 8:35 pm

Re: Harbour 3.4 (from Viktor) 2014-29-06

Postby Antonio Linares » Sat Jul 19, 2014 4:19 am

Aida,

Mucho mejor que xharbour, pero usa de momento la versión 3.2 que está aqui:

https://bitbucket.org/fivetech/harbour-xharbour-builds/downloads
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41206
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain


Return to WhatsNew / Novedades

Who is online

Users browsing this forum: No registered users and 2 guests