What about FWH 13.10 and 13.11?

What about FWH 13.10 and 13.11?

Postby driessen » Mon Dec 09, 2013 1:32 pm

It has been more than 2 months since we had an update of FWH?

I'd like to know what the plans are?

Thanks a lot in advance.
Regards,

Michel D.
Genk (Belgium)
_____________________________________________________________________________________________
I use : FiveWin for (x)Harbour v. 24.02 - Harbour 3.2.0 (February 2024) - xHarbour Builder (January 2020) - Bcc77
User avatar
driessen
 
Posts: 1396
Joined: Mon Oct 10, 2005 11:26 am
Location: Genk, Belgium

Re: What about FWH 13.10 and 13.11?

Postby TimStone » Tue Dec 10, 2013 4:42 pm

I was wondering the same thing. :)
Tim Stone
http://www.MasterLinkSoftware.com
http://www.autoshopwriter.com
timstone@masterlinksoftware.com
Using: FWH 23.10 with Harbour 3.2.0 / Microsoft Visual Studio Community 2022-24 32/64 bit
User avatar
TimStone
 
Posts: 2904
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA

Re: What about FWH 13.10 and 13.11?

Postby driessen » Fri Dec 13, 2013 10:01 am

And now I'm wondering why I don't get any answer.
Regards,

Michel D.
Genk (Belgium)
_____________________________________________________________________________________________
I use : FiveWin for (x)Harbour v. 24.02 - Harbour 3.2.0 (February 2024) - xHarbour Builder (January 2020) - Bcc77
User avatar
driessen
 
Posts: 1396
Joined: Mon Oct 10, 2005 11:26 am
Location: Genk, Belgium

Re: What about FWH 13.10 and 13.11?

Postby TimStone » Fri Dec 13, 2013 9:50 pm

I do remember a post that said certain solutions were already in 13.10 ... but we never got it.

There were also problems in 13.09 that required Antonio to send us special library builds for xHarbour, but those corrected libraries apparently didn't make it into a 13.09 build.

Apparently everyone is busy ...
Tim Stone
http://www.MasterLinkSoftware.com
http://www.autoshopwriter.com
timstone@masterlinksoftware.com
Using: FWH 23.10 with Harbour 3.2.0 / Microsoft Visual Studio Community 2022-24 32/64 bit
User avatar
TimStone
 
Posts: 2904
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA

Re: What about FWH 13.10 and 13.11?

Postby Antonio Linares » Fri Dec 13, 2013 10:58 pm

We are delayed for 13.10, but we will publish it next week. Thanks
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41314
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Re: What about FWH 13.10 and 13.11?

Postby Otto » Sat Dec 14, 2013 9:16 am

Hello Antonio,
for my feeling a monthly update is too much.
Maybe you can start poll here.
Best regards,
Otto
********************************************************************
mod harbour - Vamos a la conquista de la Web
modharbour.org
https://www.facebook.com/groups/modharbour.club
********************************************************************
User avatar
Otto
 
Posts: 6005
Joined: Fri Oct 07, 2005 7:07 pm

Re: What about FWH 13.10 and 13.11?

Postby George » Sat Dec 14, 2013 3:45 pm

Otto,
I agree with you.
My proposal, as I said before, would be updating FWH every 3 months.
Thus Fivetechsoft has time to develop, test and debug new modules to be included in new FWH versions.

Regards,

George
George
 
Posts: 724
Joined: Tue Oct 18, 2005 6:49 pm

Re: What about FWH 13.10 and 13.11?

Postby Richard Chidiak » Sat Dec 14, 2013 3:59 pm

Hello

I also think 1 update fully tested every 3 months is enough

Actually i only update fwh once or twice a year to a max in order to always stabilize a production version

My 2 cents

Richard
http://www.cbati.com

Uestudio
Fwh 13.05 Harbour 3.2 MSVC 2013
User avatar
Richard Chidiak
 
Posts: 946
Joined: Thu Oct 06, 2005 7:05 pm
Location: France

Re: What about FWH 13.10 and 13.11?

Postby fp » Sat Dec 14, 2013 5:50 pm

Two or three updates per year would be enough really. Who installs every month Fivewin update and has the time to test all changes to compatibility with its own programs?
Frank-Peter
User avatar
fp
 
Posts: 76
Joined: Fri Dec 30, 2005 10:25 am
Location: Germany

Re: What about FWH 13.10 and 13.11?

Postby TimStone » Sun Dec 15, 2013 4:50 pm

Quarterly updates would be ok if bug fixes were immediate. There were problems in 13.09 which had fixes for .07 and .08

The repairs never made it into the main build. There were supposed to be fixes in .10 to issues remaining in .09. These are all addressed in various threads.

Microsoft is now on weekly updates. For my clients I do auto updates. Each month there are new features, and bug fixes are immediate. Also important refinements are immediate. Thus I do 3 to 5 updates per month.

With an automated system this is pretty easy. This would be especially helpful with .lib updates.
Tim Stone
http://www.MasterLinkSoftware.com
http://www.autoshopwriter.com
timstone@masterlinksoftware.com
Using: FWH 23.10 with Harbour 3.2.0 / Microsoft Visual Studio Community 2022-24 32/64 bit
User avatar
TimStone
 
Posts: 2904
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA

Re: What about FWH 13.10 and 13.11?

Postby HunterEC » Mon Dec 16, 2013 6:52 am

Hi guys:

I think quarterly updates will be ok.

Tim:

Hi, can you post an example of how do you auto update your software ?

Thank you.
HunterEC
 
Posts: 723
Joined: Tue Sep 04, 2007 8:45 am

Re: What about FWH 13.10 and 13.11?

Postby elvira » Mon Dec 16, 2013 6:30 pm

Hello!,

I think it´s better few updates but more tested in deep. Latest releases have always bugs, and some important as, for example, the rpreview does not work propelly.

Also, some strings translated into languages are missing, for example.


To see auto update of a programm, see:

http://bielsys.blogspot.com.es/2009/04/ ... ca-de.html

Thanks ;))
elvira
 
Posts: 515
Joined: Fri Jun 29, 2012 12:49 pm

Re: What about FWH 13.10 and 13.11?

Postby TimStone » Mon Dec 16, 2013 6:49 pm

AUTO UPDATING: I have posted about this before but will re-state here.

There are 3 parts to my updating system. The first is client tracking and payment processing. My system processes payments, then applies them to clients, and creates an encrypted keyfile. This is then uploaded to my server. The keyfile contains the version they are authorized to, which may be in the future. My version numbering system follows the format v:yq:mu, where v is the Version, y is the last digit of the year, q is the quarter of that year, m is the month in that quarter, and u is the update within that month. Thus 6.32.24 would be the 4th update of May, 2013, for Version 6 of the software. When payments are applied, the maximum version allowed is automatically generated and added to the keyfile.

When I complete updates, the version number is set. My management system automatically uploads the update and a version file.

The customer, on their local server, has a program that runs 24/7. Every 3 hours it check my server and download the key file ( just a few seconds ). It also downloads the version file. It checks their current authorization, compares it to what is available on the server, and if there is new software, it downloads it to a folder on the server.

When the customer starts the program, they actually start a routine that checks the local server to see if a newer version is available. If so, it copies it to the workstation first, then starts the program. Otherwise, it just starts the program.

All aspects of this can be fully automated. Credit card payments can be processed online, and if successful, update the main client file.

The auto updater also does other functions. Some files are created and need to be uploaded to 3rd party vendors. This is done automatically, usually sometime after midnight when the system is not being used. Also, it runs an automatic nightly backup. Thirdly, it does an auto email system that sends out notices and reminders to their clients each night when requested. My customer sets it all up once, and then its all automatic.

Tim
Tim Stone
http://www.MasterLinkSoftware.com
http://www.autoshopwriter.com
timstone@masterlinksoftware.com
Using: FWH 23.10 with Harbour 3.2.0 / Microsoft Visual Studio Community 2022-24 32/64 bit
User avatar
TimStone
 
Posts: 2904
Joined: Fri Oct 07, 2005 1:45 pm
Location: Trabuco Canyon, CA USA

Re: What about FWH 13.10 and 13.11?

Postby Antonio Linares » Mon Dec 16, 2013 9:15 pm

I would propose every two months as once delivered we may need around two weeks for getting feedback and implement fixes.

What do you think about it ? thanks for your feedback
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 41314
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Re: What about FWH 13.10 and 13.11?

Postby IBTC » Mon Dec 16, 2013 9:27 pm

Antonio Linares wrote:I would propose every two months


Good solution.
Best Regards,
Ruediger Alich

---
HMG 3.1.3 | FTDN/FWH 13.12 | Harbour 3.2 | BCC/MinGW | Windows XP/Vista/7/8/10 (32/64-Bit), Wine (Linux/Mac) - started 1999 with FW, 1989 with Clipper
User avatar
IBTC
 
Posts: 103
Joined: Sat Oct 18, 2008 8:13 pm
Location: Stuttgart, Germany

Next

Return to FiveWin for Harbour/xHarbour

Who is online

Users browsing this forum: No registered users and 109 guests