FiveTech Software tech support forums

Posted: **Mon Apr 17, 2017 6:22 am**

James,

I did some little changes in your files and it is working fine now.

I just emailed them to you

Code: Select all Expand view: #Borland make sample, (c) FiveTech Software 2005-2009 HBDIR=c:\xharbour BCDIR=c:\bcc7 FWDIR=c:\fwh #change these paths as needed .path.OBJ = .\obj .path.PRG = .\ .path.CH = $(FWDIR)\include;$(HBDIR)\include .path.C = .\ .path.rc = .\ #important: Use Uppercase for filenames extensions, in the next two rules! PRG = \ alert.PRG \ one.PRG #C = \ #two.C PROJECT : Alert.exe Alert.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ) echo off echo $(BCDIR)\lib\c0w32.obj + > b32.bc echo obj\alert.obj obj\one.obj + >> b32.bc echo $(OBJS), + >> b32.bc echo alert.exe, + >> b32.bc echo alert.map, + >> b32.bc echo $(FWDIR)\lib\FiveHx.lib $(FWDIR)\lib\FiveHC.lib + >> b32.bc echo $(HBDIR)\lib\rtl.lib + >> b32.bc echo $(HBDIR)\lib\vm.lib + >> b32.bc echo $(HBDIR)\lib\gtgui.lib + >> b32.bc echo $(HBDIR)\lib\lang.lib + >> b32.bc echo $(HBDIR)\lib\macro.lib + >> b32.bc echo $(HBDIR)\lib\rdd.lib + >> b32.bc echo $(HBDIR)\lib\dbfntx.lib + >> b32.bc echo $(HBDIR)\lib\dbfcdx.lib + >> b32.bc echo $(HBDIR)\lib\dbffpt.lib + >> b32.bc echo $(HBDIR)\lib\hbsix.lib + >> b32.bc echo $(HBDIR)\lib\debug.lib + >> b32.bc echo $(HBDIR)\lib\common.lib + >> b32.bc echo $(HBDIR)\lib\pp.lib + >> b32.bc echo $(HBDIR)\lib\pcrepos.lib + >> b32.bc echo $(HBDIR)\lib\ct.lib + >> b32.bc echo $(HBDIR)\lib\zlib.lib + >> b32.bc echo $(HBDIR)\lib\hbzip.lib + >> b32.bc echo $(HBDIR)\lib\libmisc.lib + >> b32.bc echo $(HBDIR)\lib\tip.lib + >> b32.bc echo $(HBDIR)\lib\png.lib + >> b32.bc rem Uncomment these two lines to use Advantage RDD rem echo $(HBDIR)\lib\rddads.lib + >> b32.bc rem echo $(HBDIR)\lib\Ace32.lib + >> b32.bc echo $(BCDIR)\lib\cw32.lib + >> b32.bc echo $(BCDIR)\lib\import32.lib + >> b32.bc echo $(BCDIR)\lib\uuid.lib + >> b32.bc echo $(BCDIR)\lib\ws2_32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\odbc32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\rasapi32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\nddeapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\msimg32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\psapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\gdiplus.lib + >> b32.bc echo $(BCDIR)\lib\psdk\iphlpapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\shell32.lib, >> b32.bc IF EXIST Alert.res echo Alert.res >> b32.bc $(BCDIR)\bin\ilink32 -Gn -aa -Tpe -s @b32.bc del b32.bc .PRG.OBJ: $(HBDIR)\bin\harbour $< /L /N /W /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include $(BCDIR)\bin\bcc32 -c -tWM -I$(HBDIR)\include -oobj\$& obj\$&.c .C.OBJ: echo -c -tWM -D__HARBOUR__ -DHB_API_MACROS > tmp echo -I$(HBDIR)\include;$(FWDIR)\include >> tmp $(BCDIR)\bin\bcc32 -oobj\$& @tmp $&.c del tmp #Alert.res : Alert.rc # $(BCDIR)\bin\brc32.exe -r Alert.rc

Posted: **Mon Apr 17, 2017 3:46 pm**

Antonio,

Thanks for spotting the two Main() functions. I missed that because I was ignoring it in my main app. There a PRG was getting compiled into the app that wasn't supposed to be and the app was running fine, so I ignored it. It the test case it was significant.

The only change you made to the make file I note is that you changed the path for the C files from .\obj to .\ . However, I have my C files in .\obj so I get this error when the path is changed:

Fatal: '.\alert.c' does not exist - don't know how to make it

Of course this is expected.

So I changed it back and it compiles fine. However, there is still a problem and perhaps the location of the C files is related. I still do not get a recompile when any PRG is changed. I am guessing that this is the line that looks for changes:

Alert.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ)

Perhaps this is a path issue? Do the paths need to be added to the above, or is the make file supposed to already know where the OBJs and C files are? It seems to know elsewhere in the make file.

Where are the C files normally stored, with the PRGs or with the OBJs. Or someplace else?

The old Clipper RMake.exe was so easy compared to Borland's Make. Sigh.

James

Posted: **Mon Apr 17, 2017 9:42 pm**

James,

The paths are specified here (in the make file):

#change these paths as needed
.path.OBJ = .\obj
.path.PRG = .\
.path.CH = $(FWDIR)\include;$(HBDIR)\include
.path.C = .\
.path.rc = .\

Posted: **Mon Apr 17, 2017 9:58 pm**

Antonio,

Yes, I know that. But the make file is not checking the dates and times of the OBJs and the Cs against the PRGs when a PRG is changed. So either it is trying and it can't find the files, or it is not checking at all. I am trying to figure out which and how to fix it.

Try editing the One.prg file (just change the message displayed) and then try running the make file again. The old message will still be displayed and if you look at the date and time of the Alert.exe it will not have changed even though the One.prg was changed.

I am beginning to think it would be easier to write my own make file utility rather than trying to figure out Borland's make.exe works.

James

Posted: **Mon Apr 17, 2017 10:15 pm**

Antonio,

Try editing the One.prg file (just change the message displayed) and then try running the make file again. The old message will still be displayed and if you look at the date and time of the Alert.exe it will not have changed even though the One.prg was changed.

Actually, I said this wrong.

The Alert.exe will be updated (it is recompiled) but the one.c and one.obj files are not updated. So the new Alert.exe is the same as the last one even though it was recompiled. I just did this again and here are my file dates and times:

Code: Select all Expand view: Alert.exe 4/17/2017 3.04 PM Alert.prg 4/17/2017 3.02 PM One.prg 4/17/2017 3:04 PM \obj\One.c 4/17/2017 8:08 AM \obj\One.obj 4/17/2017 8:08 AM

James

Posted: **Tue Apr 18, 2017 6:12 am**

Please post here your current make file

Posted: **Tue Apr 18, 2017 12:13 pm**

Antonio,

This is probably the same one I sent you in a zip file a couple of days ago. I don't think I have made any changes since then. Well, I may have made some changes then changed them back. Anyway this is the most current one.

James

Code: Select all Expand view: #Borland make sample, (c) FiveTech Software 2005-2009 HBDIR=c:\xharbour BCDIR=c:\bcc7 FWDIR=c:\fwh #change these paths as needed .path.OBJ = .\obj .path.PRG = .\ .path.CH = $(FWDIR)\include;$(HBDIR)\include .path.C = .\obj .path.rc = .\ #important: Use Uppercase for filenames extensions, in the next two rules! PRG = \ alert.PRG \ one.PRG C = \ alert.c \ one.c #two.C PROJECT : Alert.exe Alert.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ) echo off echo $(BCDIR)\lib\c0w32.obj + > b32.bc echo obj\alert.obj obj\one.obj, + >> b32.bc #echo $(OBJS), + >> b32.bc echo alert.exe, + >> b32.bc echo alert.map, + >> b32.bc echo $(FWDIR)\lib\FiveHx.lib $(FWDIR)\lib\FiveHC.lib + >> b32.bc echo $(HBDIR)\lib\rtl.lib + >> b32.bc echo $(HBDIR)\lib\vm.lib + >> b32.bc echo $(HBDIR)\lib\gtgui.lib + >> b32.bc echo $(HBDIR)\lib\lang.lib + >> b32.bc echo $(HBDIR)\lib\macro.lib + >> b32.bc echo $(HBDIR)\lib\rdd.lib + >> b32.bc echo $(HBDIR)\lib\dbfntx.lib + >> b32.bc echo $(HBDIR)\lib\dbfcdx.lib + >> b32.bc echo $(HBDIR)\lib\dbffpt.lib + >> b32.bc echo $(HBDIR)\lib\hbsix.lib + >> b32.bc echo $(HBDIR)\lib\debug.lib + >> b32.bc echo $(HBDIR)\lib\common.lib + >> b32.bc echo $(HBDIR)\lib\pp.lib + >> b32.bc echo $(HBDIR)\lib\pcrepos.lib + >> b32.bc echo $(HBDIR)\lib\ct.lib + >> b32.bc echo $(HBDIR)\lib\zlib.lib + >> b32.bc echo $(HBDIR)\lib\hbzip.lib + >> b32.bc echo $(HBDIR)\lib\libmisc.lib + >> b32.bc echo $(HBDIR)\lib\tip.lib + >> b32.bc echo $(HBDIR)\lib\png.lib + >> b32.bc rem Uncomment these two lines to use Advantage RDD rem echo $(HBDIR)\lib\rddads.lib + >> b32.bc rem echo $(HBDIR)\lib\Ace32.lib + >> b32.bc echo $(BCDIR)\lib\cw32.lib + >> b32.bc echo $(BCDIR)\lib\import32.lib + >> b32.bc echo $(BCDIR)\lib\uuid.lib + >> b32.bc echo $(BCDIR)\lib\ws2_32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\odbc32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\rasapi32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\nddeapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\msimg32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\psapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\gdiplus.lib + >> b32.bc echo $(BCDIR)\lib\psdk\iphlpapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\shell32.lib, >> b32.bc IF EXIST Alert.res echo Alert.res >> b32.bc $(BCDIR)\bin\ilink32 -Gn -aa -Tpe -s @b32.bc #del b32.bc .PRG.OBJ: $(HBDIR)\bin\harbour $< /L /N /W /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include $(BCDIR)\bin\bcc32 -c -tWM -I$(HBDIR)\include -oobj\$& obj\$&.c .C.OBJ: echo -c -tWM -D__HARBOUR__ -DHB_API_MACROS > tmp echo -I$(HBDIR)\include;$(FWDIR)\include >> tmp $(BCDIR)\bin\bcc32 -oobj\$& @tmp $&.c del tmp #Alert.res : Alert.rc # $(BCDIR)\bin\brc32.exe -r Alert.rc

Posted: **Tue Apr 18, 2017 5:01 pm**

Hello James

You should change in your mak-file!

Code: Select all Expand view: .path.OBJ = .\obj .path.PRG = .\ .path.CH = $(FWDIR)\include;$(HBDIR)\include #.path.C = .\obj thats is wrong, see next line .path.C = .\ .path.rc = .\ #important: Use Uppercase for filenames extensions, in the next two rules! PRG = \ alert.PRG \ one.PRG C = \ #there you have note only files which source is in C-Code delete your lines alert.c and one.c #two.C PROJECT : Alert.exe # and rest of your mak-file

that's all - it will run fine!

Posted: **Tue Apr 18, 2017 5:14 pm**

Anton,

Putting the C files in or not makes no difference. If a PRG is edited and saved, the C and OBJs are not regenerated. It just relinks the EXE without the changes using the old OBJs.

I can't figure out how to force the make file to check the date-time stamps and then recompile if needed.

James

Posted: **Tue Apr 18, 2017 7:37 pm**

James,

Please remove this:

C = \
alert.c \
one.c
#two.C

and this also:

Alert.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ)

Posted: **Tue Apr 18, 2017 10:27 pm**

Antonio,

I had already tried that, but I just did it again and there is no difference.

I have tried each one of these variations:

Alert.exe : $(OBJS)
Alert.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ)
Alert.exe : $(PRG:.PRG=.OBJ)

And I tried it without any of the above and none of those tests force recompiling of the OJBs and Cs.

Is it working for you?

James

Posted: **Wed Apr 19, 2017 5:22 am**

James,

These are working perfectly fine:

go.bat

Code: Select all Expand view: @if not exist obj mkdir obj c:\bcc7\bin\make -f test.mak

test.mak

Code: Select all Expand view: #Borland make sample, (c) FiveTech Software 2005-2017 HBDIR=c:\xharbour BCDIR=c:\bcc7 FWDIR=c:\fwh #change these paths as needed .path.OBJ = .\obj .path.PRG = .\ .path.CH = $(FWDIR)\include;$(HBDIR)\include .path.C = .\obj .path.rc = .\ PRG = \ alert.prg \ one.prg PROJECT : Alert.exe Alert.exe : $(PRG:.prg=.obj) echo off echo $(BCDIR)\lib\c0w32.obj + > b32.bc echo obj\alert.obj obj\one.obj, + >> b32.bc #echo $(OBJS), + >> b32.bc echo alert.exe, + >> b32.bc echo alert.map, + >> b32.bc echo $(FWDIR)\lib\FiveHx.lib $(FWDIR)\lib\FiveHC.lib + >> b32.bc echo $(HBDIR)\lib\rtl.lib + >> b32.bc echo $(HBDIR)\lib\vm.lib + >> b32.bc echo $(HBDIR)\lib\gtgui.lib + >> b32.bc echo $(HBDIR)\lib\lang.lib + >> b32.bc echo $(HBDIR)\lib\macro.lib + >> b32.bc echo $(HBDIR)\lib\rdd.lib + >> b32.bc echo $(HBDIR)\lib\dbfntx.lib + >> b32.bc echo $(HBDIR)\lib\dbfcdx.lib + >> b32.bc echo $(HBDIR)\lib\dbffpt.lib + >> b32.bc echo $(HBDIR)\lib\hbsix.lib + >> b32.bc echo $(HBDIR)\lib\debug.lib + >> b32.bc echo $(HBDIR)\lib\common.lib + >> b32.bc echo $(HBDIR)\lib\pp.lib + >> b32.bc echo $(HBDIR)\lib\pcrepos.lib + >> b32.bc echo $(HBDIR)\lib\ct.lib + >> b32.bc echo $(HBDIR)\lib\zlib.lib + >> b32.bc echo $(HBDIR)\lib\hbzip.lib + >> b32.bc echo $(HBDIR)\lib\libmisc.lib + >> b32.bc echo $(HBDIR)\lib\tip.lib + >> b32.bc echo $(HBDIR)\lib\png.lib + >> b32.bc rem Uncomment these two lines to use Advantage RDD rem echo $(HBDIR)\lib\rddads.lib + >> b32.bc rem echo $(HBDIR)\lib\Ace32.lib + >> b32.bc echo $(BCDIR)\lib\cw32.lib + >> b32.bc echo $(BCDIR)\lib\import32.lib + >> b32.bc echo $(BCDIR)\lib\uuid.lib + >> b32.bc echo $(BCDIR)\lib\ws2_32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\odbc32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\rasapi32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\nddeapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\msimg32.lib + >> b32.bc echo $(BCDIR)\lib\psdk\psapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\gdiplus.lib + >> b32.bc echo $(BCDIR)\lib\psdk\iphlpapi.lib + >> b32.bc echo $(BCDIR)\lib\psdk\shell32.lib, >> b32.bc IF EXIST Alert.res echo Alert.res >> b32.bc $(BCDIR)\bin\ilink32 -Gn -aa -Tpe -s @b32.bc #del b32.bc .prg.obj: $(HBDIR)\bin\harbour $< /L /N /W /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include $(BCDIR)\bin\bcc32 -c -tWM -I$(HBDIR)\include -oobj\$& obj\$&.c alert.res : alert.rc # $(BCDIR)\bin\brc32.exe -r Alert.rc

alert.prg

Code: Select all Expand view: #include "FiveWin.ch" function Main() One() return nil

one.prg

Code: Select all Expand view: #include "FiveWin.ch" function One() MsgInfo( "ok" ) return nil

Posted: **Wed Apr 19, 2017 3:15 pm**

Antonio,

I had all kinds of trouble after copying all your files from your previous message. Mostly they were due to the fact that the forum replaces tabs with spaces. Now I am still getting this error:

Code: Select all Expand view: C:\Users\James\Documents\Projects\Make\Antonio>c:\bcc7\bin\make -f test.mak MAKE Version 5.41 Copyright (c) 1987, 2014 Embarcadero Technologies, Inc. Fatal: ' ' does not exist - don't know how to make it Process completed, Exit Code 1. Execution time: 00:00.217

Which, of course, is not helpful at all. I do note that only the alert.obj and alert.c files were generated, not the files for One.prg.

Will you please send me all the files in a zip (no need to rename "zip").

Regards,
James

Posted: **Wed Apr 19, 2017 3:38 pm**

Antonio,

Also, I keep getting this error:

Code: Select all Expand view: Fatal: Too many DEF file names: c:\bcc7\lib\psdk\rasapi32.lib

I have never seen that before, and I don't know what it means.

If I leave that LIB out, then I get the same error at the next LIB in the list. I can't imagine that six lines of code would cause this, so the problem seems like it is not in the code.

I found an explanation on the Embarcadero site, but it doesn't help much:

http://docwiki.embarcadero.com/RADStudio/Seattle/en/Too_many_DEF_file_names_%27identifier%27

James

Posted: **Wed Apr 19, 2017 3:47 pm**

Antonio,

When you say:

These are working perfectly fine:

Do you mean also that the OBJs and Cs are getting recompiled when any change is made to a PRG? Or, just that it compiles without error?

James

FiveTech Software tech support forums

Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues

Re: Borland Make Utility Issues