check on a archive from a array- resolved

[Silvio.Falconi]

I have to check in an archive to see if there are records that need to be deleted because they are not needed.
To check which elements are not necessary I have to compare if two items of an array (adata) previously loaded are the same in the archive.
If in the archive a record has the contents of two fields that are not equal to the items of aData must be deleted.

I made this test but it not found that I wish

Code: Select all  Expand view

Function Trova_tariffe_inutili(cDir,adata)

   Local oTariffe
   Local n
   Local cIdElemento
   Local cSettore
   Local lyes:= .f.
   Local atemp:={}

   xbrowser aData

     For n= 1 to Len(adata)
        cIdElemento:= aData [n][2]
        cSettore   := aData [n][4]

         oTariffe:=TDatabase():Open( , cDir+"TARIFFE", "DBFCDX", .T. )
         oTariffe:SetOrder( 1 )
         oTariffe:GoTop()

         Do while .not. oTariffe:eof()

            IF oTariffe:Tasettore==cSettore .and. oTariffe:TaElemento=cIdElemento
            else
               aadd(atemp,{oTariffe:TaElemento,oTariffe:Tasettore} )
                Endif

                oTariffe:skip()
             Enddo
             oTariffe:close()
             cSettore:=""
          next


          xbrowser  atemp
      return nil

on aData I have these items




on archive Tariffe.dbf I have these records



so the procedure must search only the two records


because tasettore = "I" and tasettore ="F" on adata not exit

How I can resolve it ?

[ukoenig]

Silvio,

If in the archive a record has the contents of two fields
that are not equal to the items of aData must be deleted.

my test to filter data from a array
Just to know if the speed needs to be increased :
how many records You have to test and what is the length of the array to be checked



regards
Uwe

[Silvio.Falconi]

Uwe,
I cannot Know it
on archive can be also 2000 rows
on aData array generally there are now 24 rows but it depend from some factors
I need it ...I can explain you
when creating a beach I can insert elements that are for hire, for these elements the price list must be made for each price list which are generally 3 and can vary according to the sectors from A to H
elements x price lists x sectors
the next are those who create the beach can remove an element or a sector: for example, this year you find an umbrella in the H sector but next year you will find a beach umbrella in sector G and not more H
so the idea was to find in the tariff archive the price list that is no longer necessary because precisely the rates for the H sector umbrella are no longer needed

[ukoenig]

Silvio,

how often You have to run this test.
I'm just thinking about. to include a meter-control in case of a longer running time.

regards
Uwe

[Silvio.Falconi]

No because the final user can run this procedure at init of each season.
i must know wich record to erase because then on report of price list the record deleted must no printed

[ukoenig]

Silvio,

I tested a solution for better speed ( short and very fast )
It only scans the array-data and not the maybe possible 2000 records from the dbf

Code: Select all  Expand view

FUNCTION SELECT_DATA(oCust1, aData)
LOCAL n := 1

// CreateIndex( cFile, cTag, cKey, lUnique, lDescend, lMemory )
oCust1:CreateIndex( "CUSTOMER", "TMP", "LAST + FIRST", , , .T. ) // index in memory 
 
FOR n := 1 TO LEN(aData)  // scan and select data from array
    // filter on array-data
    oCust1:ORDSCOPE(0, NIL ) // reset
    oCust1:ORDSCOPE(1, NIL ) // reset
    oCust1:ORDSCOPE(0, aData[n][1] + aData[n][2] ) // set top scope from array
    oCust1:ORDSCOPE(1, aData[n][1] + aData[n][2] ) // set bottom scope from array
   
    oCust1:GoTop()
    DO WHILE oCust1:EOF() = .F.  
        oCust1:DELETE()  // delete filter-data
        oCust1:Skip()
    ENDDO
    n++
NEXT

oCust1:ORDSCOPE(0, NIL ) // reset
oCust1:ORDSCOPE(1, NIL ) // reset
 

regards
Uwe

[Silvio.Falconi]

Silvio,

I tested a solution for better speed ( short and very fast )
It only scans the array-data and not the maybe possible 2000 records from the dbf

Code: Select all  Expand view

FUNCTION SELECT_DATA(oCust1, aData)
LOCAL n := 1

// CreateIndex( cFile, cTag, cKey, lUnique, lDescend, lMemory )
oCust1:CreateIndex( "CUSTOMER", "TMP", "LAST + FIRST", , , .T. ) // index in memory 
 
FOR n := 1 TO LEN(aData)  // scan and select data from array
    // filter on array-data
    oCust1:ORDSCOPE(0, NIL ) // reset
    oCust1:ORDSCOPE(1, NIL ) // reset
    oCust1:ORDSCOPE(0, aData[n][1] + aData[n][2] ) // set top scope from array
    oCust1:ORDSCOPE(1, aData[n][1] + aData[n][2] ) // set bottom scope from array
   
    oCust1:GoTop()
    DO WHILE oCust1:EOF() = .F.  
        oCust1:DELETE()  // delete filter-data
        oCust1:Skip()
    ENDDO
    n++
NEXT

oCust1:ORDSCOPE(0, NIL ) // reset
oCust1:ORDSCOPE(1, NIL ) // reset
 

regards
Uwe

Uwe,
I tried
I have Tariffe.dbf indexed with UPPER(TAELEMENTO)+TASETTORE
cId:=adata[n][2] // taelemento
cSector:=adata[n][4] // tasettore

I made

Code: Select all  Expand view

oTariffe:=TDatabase():Open( , cDir+"TARIFFE", "DBFCDX", .T. )
         oTariffe:SetOrder( 1 )  //  UPPER(TAELEMENTO)+TASETTORE
         oTariffe:GoToP()

         for n:= 1 to len(adata)
            cId:=adata[n][2]
            cSector:=adata[n][4]


            oTariffe:ORDSCOPE(0, NIL ) // reset
            oTariffe:ORDSCOPE(1, NIL ) // reset
            oTariffe:ORDSCOPE(0, aData[n][2] + aData[n][4] ) // set top scope from array
            oTariffe:ORDSCOPE(1, aData[n][2] + aData[n][4] )

            oTariffe:GoTop()
        DO WHILE oTariffe:EOF() = .F.
            oTariffe:DELETE()  // delete filter-data
            oTariffe:Skip()
        ENDDO
        n++
    NEXT


 

IT delete all as you can see here



while it must delete only the records have F and I on 7th column


to not delete all record I thinked to insert a LOGIC field TACANCEL and chabge this as

DO WHILE oTariffe:EOF() = .F.
// oTariffe:DELETE() // delete filter-data
oTariffe:tacancel:=.t.
oTariffe:save()
oTariffe:commit()
oTariffe:Skip()
ENDDO

[Silvio.Falconi]

Perhaps Now I resolved

Code: Select all  Expand view

oTariffe:=TDatabase():Open( , cDir+"TARIFFE", "DBFCDX", .T. )
         oTariffe:SetOrder( 1 )  //  UPPER(TAELEMENTO)+TASETTORE
         oTariffe:GoToP()

         for n:= 1 to len(adata)
            cId:=adata[n][2]
            cSector:=adata[n][4]


            oTariffe:ORDSCOPE(0, NIL ) // reset
            oTariffe:ORDSCOPE(1, NIL ) // reset
            oTariffe:ORDSCOPE(0, aData[n][2] + aData[n][4] ) // set top scope from array
            oTariffe:ORDSCOPE(1, aData[n][2] + aData[n][4] )

            oTariffe:GoTop()
        DO WHILE oTariffe:EOF() = .F.
         //  oTariffe:DELETE()  // delete filter-data
           oTariffe:tacancel:=.t.
           oTariffe:save()
           oTariffe:commit()
           oTariffe:Skip()
        ENDDO
        n++
    NEXT

Now I haveonly two the records with tacancel :=.t.
I must make an array with this filter and show it
then if the fina user confirm I can delete only the records having tacancel:= .t.

oTariffe:ORDSCOPE(0, NIL ) // reset
oTariffe:ORDSCOPE(1, NIL ) // reset

oTariffe:GoToP()
atemp:=oTariffe:FW_DbfToArray( cFieldList, { || oTariffe:TACANCEL=.t. } )
xbrowser atemp



Finally, thanks to Uwe, I have an array with the records must be deleted !!!!