nYoffset and nXoffset

[Silvio.Falconi]

Could someone explain to me how to implement oPrn:nYoffset and oPrn:nXoffset in a print with a practical example?
what is the purpose of oPrn:nYoffset and oPrn:nXoffset ?

[Otto]

nXoffset and nYoffset are only used in the methods:

New - Sets nXoffset and nYoffset based on printer settings.

Cmtr2Pix - Uses nXoffset and nYoffset to convert centimeters to pixels.

Mmtr2Pix - Uses nXoffset and nYoffset to convert millimeters to pixels.

Inch2Pix - Uses nXoffset and nYoffset to convert inches to pixels.

CmRect2Pix - Uses nXoffset and nYoffset to convert a rectangle from centimeters to pixels.

Pix2Mmtr - Uses nXoffset and nYoffset in the comment, but not directly in the code.

Pix2Inch - Uses nXoffset and nYoffset in the comment, but not directly in the code.

// Set the X and Y offsets for printing
oPrn:nXoffset := 10; // Set X offset to 10 units
oPrn:nYoffset := 20; // Set Y offset to 20 units

// Now, when you print something, it will start from the offset position

These methods use nXoffset and nYoffset to convert units of measurement and adjust the print position on the page.

[Silvio.Falconi]

nXoffset and nYoffset are only used in the methods:

New - Sets nXoffset and nYoffset based on printer settings.

Cmtr2Pix - Uses nXoffset and nYoffset to convert centimeters to pixels.

Mmtr2Pix - Uses nXoffset and nYoffset to convert millimeters to pixels.

Inch2Pix - Uses nXoffset and nYoffset to convert inches to pixels.

CmRect2Pix - Uses nXoffset and nYoffset to convert a rectangle from centimeters to pixels.

Pix2Mmtr - Uses nXoffset and nYoffset in the comment, but not directly in the code.

Pix2Inch - Uses nXoffset and nYoffset in the comment, but not directly in the code.

// Set the X and Y offsets for printing
oPrn:nXoffset := 10; // Set X offset to 10 units
oPrn:nYoffset := 20; // Set Y offset to 20 units

// Now, when you print something, it will start from the offset position

These methods use nXoffset and nYoffset to convert units of measurement and adjust the print position on the page.

Thanks i saw when i use oprn:box and the coordinates are 0,0,2,20 It build a box more big of the Page

On default wich are the values of xoffset and y offset?

[Silvio.Falconi]

there is something not working

in my program I have this result

Let me start by saying I don't use xoffset and yoffset

and the values for the HP laserjet professional P1606dn printer are 94 and 94







on another test I made now the same not use xoffset and yoffset
and the values for the HP laserjet professional P1606dn printer are 94 and 94
the result is different



this is the test

Code: Select all  Expand view  RUN

#include "fivewin.ch"

Function test()
local oPrn
local cDescRep := "Trying xoffset and yOffset"
local aPrn := GetPrinters()

//-------------------------------------------------------//


local nWidth      := 20  +0.2
local nHeight     := 7.80 +0.5
local nGutter     := 0.5
local nRows       := 3
local nCols        := 1
local nPrintHeight   := nRows * ( nHeight + nGutter ) - nGutter
local nPrintWidth    := nCols * ( nWidth  + nGutter ) - nGutter
local nTopMargin     := 0
local nLeftMargin    := 0
local  nTop     := nTopMargin
local nLeft := nLeftMargin
local nPageH := 29.7      //A4
local nPageW := 21
//-------------------------------------------------------//

          IF nTopMargin= 0
                    nTopMargin     := ( nPageH - nPrintHeight ) / 2
                    nLeftMargin    := ( nPageW - nPrintWidth  ) / 2
                 ENDIF

            nTop  := nTopMargin
            nLeft := nLeftMargin

xbrowser aPrn



oPrn:=PrintBegin(cDescRep,.F.,.t.,,.T.)


? oPrn:nYoffset,oPrn:nXoffset   // give me 94,94

*           oPrn:nYoffset  :=0
*           oPrn:nXoffset  :=0

PageBegin()

    //first Box
      PrintBox(nTop, nLeft, nWidth, nHeight,0,0,20,1.2,oPrn)

    //second Box
      PrintBox(nTop, nLeft, nWidth, nHeight,1.2,0,20,7.8,oPrn)


  PageEnd()
PrintEnd()
return nil


//---------------------------------------------------------------------//
Function PrintBox(nRow, nCol, nWidth, nHeight,nX,nY,nLar,nAlt,oPrn)
local oFnt
local cFontname:= "Arial"
local nFontSize:= 12
local lBold:= .f.
local lItalic:= .f.
local X,Y,Z,K
local lBordo:= .t.
local nColorBordo:= CLR_BLACK
local nSizeBordo:=0.01
local nBackcolor :=CLR_WHITE
local cText:=""
local nColorFont:= CLR_BLACK
local nAlignOriz:= 1
local nAlignVert:= 1
local cUnit:= "CM"


       nRow     += 0.2
       nCol     += 0.2
       nWidth   -= 0.4
       nHeight  -= 0.4

       x:=  nRow+nX
       y:=  nCol+nY
       z:=  x+nAlt
       k:=  y+nLar



     //--------------------------------------------------------------------------//
      oFnt:=TFont():New(cFontName ,0,-nFontSize,.F.,lBold ,,,,lItalic,,,,,,,oPrn)
       IF lBordo
         oPrn:Box(X, Y, Z, K,;
                { nColorBordo, (nSizeBordo) }, nBackcolor, ;
                {cText,  oFnt, nColorFont, "TL" }, ;
                 cUnit )
      else
          oPrn:Box(X, Y, Z, K,;
                { CLR_WHITE, 1 }, CLR_WHITE, ;
                {cText,  oFnt, nColorFont, "TL" }, ;
                 cUnit )
        endif
         oFnt:end()
      //----------------------------------------------------------------------------//

  return nil
 

the following parameters are identical to both tests but behave differently

the Box values are also the same

Code: Select all  Expand view  RUN

local nWidth      := 20  +0.2
local nHeight     := 7.80 +0.5
local nGutter     := 0.5
local nRows       := 3
local nCols        := 1
local nPrintHeight   := nRows * ( nHeight + nGutter ) - nGutter
local nPrintWidth    := nCols * ( nWidth  + nGutter ) - nGutter

                    nTopMargin     := ( nPageH - nPrintHeight ) / 2
                    nLeftMargin    := ( nPageW - nPrintWidth  ) / 2

 

If I insert

oPrn:nYoffset := 150
oPrn:nXoffset := 120

I have this result

[Otto]

Link in printer.prg and insert some msgInfo().
Try to find the differences.

[Silvio.Falconi]

Link in printer.prg and insert some msgInfo().
Try to find the differences.

I update the message see the last picture

[Otto]

I do not see that method box supports: nXoffset or nYottset.
Look into printer.prg.
METHOD Box( nRow, nCol, nBottom, nRight, oPen ) INLINE ;
Rectangle( ::hDCOut, nRow, nCol, nBottom, nRight,;
If( oPen != nil, oPen:hPen, 0 ) )

[Silvio.Falconi]

I do not see that method box supports: nXoffset or nYottset.
Look into printer.prg.
METHOD Box( nRow, nCol, nBottom, nRight, oPen ) INLINE ;
Rectangle( ::hDCOut, nRow, nCol, nBottom, nRight,;
If( oPen != nil, oPen:hPen, 0 ) )

it's not the problem of oPrn:Box, but I think you have an old version of Tprinter ( printer.prg) , so now the Box method of Tprinter is

Code: Select all  Expand view  RUN

METHOD Box( nTop, nLeft, nBottom, nRight, anoPen, noBrush, aText, cUnits )

I need to Know the parameters when the user select a printer, I think .....

many values are changed when the user prints because a printer is selected that returns certain values and changes the values entered into the test

[Silvio.Falconi]

I saw now on a oldest Tprinter class modified by Luis Krause

Vampire Path he fixed inverted values to ::nXOffset and ::nYOffset

probably fwhteannon modified these parameters taking into account Luis Krause's measures so the error in nxOffsett and nYOffset still remains

[Silvio.Falconi]

TRy this

if you make

aOffset = PrnOffset( oPrn )

xbrowser aOffset

and then

? oPrn:nYoffset,oPrn:nXoffset

give you different values


here

aOffset = PrnOffset( oPrn ) give me 0,0
oPrn:nYoffset,oPrn:nXoffset give me 94,94

on class Tprinter the offset values are take from the function PrnOffset( oPrn ) line 419/421

Code: Select all  Expand view  RUN

 if ::hDC != 0
      aOffset    = PrnOffset( ::hDC )
      ::nXOffset = aOffset[ 1 ]
      ::nYOffset = aOffset[ 2 ]

If I add to project tPrinter class and add at line 434

? ::nXOffset,::nYOffset

give me 94,94

then on my test.prg

I make
? ::nXOffset,::nYOffset

and it give me 0,0

WHY ?

[Silvio.Falconi]

what I want you to understand is that
if I print a Box here at school
I have to change the parameters of nXoffset and yOffset to 120,150 because I use the HP laserjet printer
you imagine that if my program is used in another school
with another printer that I don't know the parameters are wrong and the print comes off the sheet
I can't have any worries like that, the program should always work the same way

[Otto]

I understand but don't have a solution.