Fwh 23.10 TGet another problem (UNSOLVED)

[ertan]

Mr. Rao,

I'm not tdialog. My all child dialogs is twindow and tmdichild based. Sorry.

Best regards,

[Horizon]

Hi Mr. Rao,

Code: Select all  Expand view  RUN

METHOD Initiate( hDlg ) CLASS TControl

   DEFAULT ::lActive := .t., ::lDrag := .f., ::lCaptured := .f.,;
           ::lFocused := .f., ::lCancel := .f., ::lTransparent := .f.
        IF ::ClassName()="TGET"
        ? FW_SetUnicode(), ::lUnicode, "Initiate - c1",IsWindowUnicode(::hWnd), PROCNAME()
        ENDIF
   if( ( ::hWnd := GetDlgItem( hDlg, ::nId ) ) != 0 )  <------------------- This line.
        IF ::ClassName()="TGET"
        ? FW_SetUnicode(), ::lUnicode, "Initiate - c1-1",IsWindowUnicode(::hWnd), PROCNAME()
        ENDIF
 

I think GetDlgItem changing something.

[Horizon]

IsWindowUnicode( oGet_1:hWnd ) -----> .T. <--------- It should not be.

It should always remain .F.
In my tests here, it always remains .F.
In your case, it is .T. from the beginning? Or is it changing to .T. during execution?

Instead of adding ACTION clause, if you run the test program without changes this status is shown by the SAY

Code: Select all  Expand view  RUN

 @ 200, 40 SAY { || If( IsWindowUnicode( oGet:hWnd ), "UTF8", "ANSI" ) + ;
      " GET" } SIZE 200,32 PIXEL OF oDlg UPDATE
 

This result always remains "ANSI GET".
Do you see "UTF8 GET" here?

I see "UTF8 GET".

[nageswaragunupudi]

Can you reproduce here the METHOD Link( lSubClass ) in your Window.prg?

[ertan]

Mr. Rao,

I'm not use tdialog but I Use TFolderEx. TFolderEx each sheets is use tdialog. I just wanted to remind

My All tget controls of TFolderEx is perfectly works.

Best regards,

[Horizon]

Can you reproduce here the METHOD Link( lSubClass ) in your Window.prg?

I didn't fully understand. Variables are changed before ::Link() in Initiate method in Control.prg. Do you want me to add MsgInfo to the Link method in Window.png?

[nageswaragunupudi]

I see "UTF8 GET".

It should not be. It should always remain "ANSI GET".
Can you please re-install FWH2310 ( may be in a separate folder ) and build the above sample with buildh.ba in the samples folder?
For a moment, let us not bother about the font. Important for us is to check whether the Get is ANSI or Unicode

[Horizon]

I see "UTF8 GET".

It should not be. It should always remain "ANSI GET".
Can you please re-install FWH2310 ( may be in a separate folder ) and build the above sample with buildh.ba in the samples folder?
For a moment, let us not bother about the font. Important for us is to check whether the Get is ANSI or Unicode

When I start to run my application, it say "ANSI GET" first, after than when i press any character (1, A, Ğ), it changes to "UTF8 GET"

I am downloading and test again.

[Horizon]

We tried several times to reproduce your problem at our end with FWH2310 but could not. In other words, Ansi Gets are correctly working here as expected.

We enhanced the test we posted earlier for more detailed testing. This is the sample we tried.

Code: Select all  Expand view  RUN

#include "fivewin.ch"

REQUEST HB_CODEPAGE_TRWIN

function Main()

   local oDlg, oGet, oFont, nKey := 0
   local cVar  := Space( 10 )

   HB_CDPSELECT( "TRWIN" )
   FW_SetUnicode( .f. )
   SetGetColorFocus()

   DEFINE FONT oFont NAME "Segoe UI" SIZE 0,-20 CHARSET 162 // Use the charset that works for you

   DEFINE DIALOG oDlg SIZE 450,300 PIXEL TRUEPIXEL FONT oFont ;
      TITLE FWVERSION

   @  40, 40 GET oGet VAR cVar SIZE 200,32 PIXEL OF oDlg ON CHANGE oDlg:Update()

   oGet:bKeyChar  := { |k| nKey := k }

   @  40,300 SAY { || "Key: " + Str( nKey, 3 ) } SIZE 120,30 PIXEL UPDATE

   @  80, 40 SAY { || StrToHex( Trim( cVar ), " " ) } SIZE 390,32 PIXEL OF oDlg UPDATE

   @ 120, 40 SAY { || ListAsc( cVar ) } SIZE 390,70 PIXEL OF oDlg UPDATE

   @ 200, 40 SAY { || If( IsWindowUnicode( oGet:hWnd ), "UTF8", "ANSI" ) + ;
      " GET" } SIZE 200,32 PIXEL OF oDlg UPDATE

   @ 200,310 BUTTON "CLOSE" SIZE 100,40 PIXEL OF oDlg ACTION oDlg:End()

   ACTIVATE DIALOG oDlg CENTERED

   cVar  := Trim( cVar )

   ? cVar, StrToHex( cVar ), IsUtf8( cVar )

return nil

static function ListAsc( cVar )

   local aList := {}
   local c

   cVar  := Trim( cVar )
   for each c in cVar
      AAdd( aList, ASC( c ) )
   next

return FW_ArrayAsList( aList )

This is how it is working here.


When FW_SetUnicode( .F. ), no keychar is higher than 255 and none of the special or other characters are displayed as "?".

We request both of you to try this sample and point out the problem you are experiencing.

Hi Mr. Rao,

I have dowloaded fwh 23.10 and run above sample. As you said before, it says always "ANSI GET".

I have deleted all my obj and deleted tget and control prg in my mak file. compiled again. My first screen is login page. When I start to run my application, it say "ANSI GET" first, after than when i press any character (1, A, Ğ), it changes to "UTF8 GET"

For a moment, let us not bother about the font. Important for us is to check whether the Get is ANSI or Unicode

There is not any font problem anymore.

[nageswaragunupudi]

I have dowloaded fwh 23.10 and run above sample. As you said before, it says always "ANSI GET".

I have deleted all my obj and deleted tget and control prg in my mak file. compiled again. My first screen is login page. When I start to run my application, it say "ANSI GET" first, after than when i press any character (1, A, Ğ), it changes to "UTF8 GET"

This should not change to "UTF8 GET".
We need to find the reason.

May I request Mr. Ertan to kindly inform if he always sees "ANSI GET" and does it change or not change to "UTF8 GET" later on? Thanks in advance for your help.

[Horizon]

Hi,

I also test fwh 23.07. It says always "ANSI GET".

[ertan]

Mr. Rao,

I confirm. Samples say always "ANSI GET". FWH 23.07 and 23.10

Best regards,

[nageswaragunupudi]

Mr. Rao,

I confirm. Samples say always "ANSI GET". FWH 23.07 and 23.10

Best regards,

Thanks for the information.
But our friend Hakan is getting different results.

I will again download and test again.

[ertan]

Mr. Rao,

Your welcome. I'm not use any third party components or activex.

Best regards,

[nageswaragunupudi]

Are you using Windows Manifest while testing this sample?