oBrw:Refresh(.T.) don't refresh new record

[dutch]

Dear All,

Code: Select all  Expand view  RUN

DEFINE TIMER oTimer OF oWnd INTERVAL 5000 ACTION (oBrw:Refresh(.T.))

I use oBrw:Refresh( .T. ) for refresh new record but when I enter the new record, it doesn't show on the Browse.

oBrw:Refresh( .T. ) = :Upstable() ? When the new record append, should it show on the Browse?

Regards,
Dutch

[Richard Chidiak]

Dutch

Try obrw:gobottom() before obrw:refresh(.t.) and make sure you have

oBrw:bBookMark := {| n | iif( n == nil,(MYALIAS)->(RecNo()), (MYALIAS)->(dbgoto(n)) ) } // Required!

anyway when using rdd, xbrowse refresh is still buggy and not performing as expected, i will post a sample today that shows the problem.

Richard

[Richard Chidiak]

Antonio,

Can you please take a look at the sample below
i join 2 images that show the problem, still refresh has bad painting

Refresh(.t.) will force the record to be first on the list qnd redraw the whole page which is not always what we want to do.
Thanks for help

Richard

fwh 8.03

Code: Select all  Expand view  RUN

#include "FiveWin.ch"
#include "xbrowse.ch"

function MAIN()
LOCAL AADBF := {}, ;
      I     := 0, ;
      OBRW

REQUEST DBFCDX
Rddsetdefault( "DBFCDX" )

ERASE ("TEST.DBF")
ERASE ("TEST.CDX")

aADBF := {}
AADD(aADBF, {"NAME",     "C", 40, 0 })
AADD(aADBF, {"NUMID",    "N", 06, 0 })
DBCREATE("TEST", aADBF)
USE TEST NEW
INDEX ON NUMID TAG "NUMID"
INDEX ON NAME  TAG "NAME"
TEST->(ORDSETFOCUS("NAME"))

FOR I = 1 TO 100
   APPEND BLANK
   REPLACE TEST->NUMID    WITH I
   REPLACE TEST->NAME     WITH "NAME" + STR(I,3)
NEXT

TEST->(DBGOTOP())

DEFINE WINDOW oWnd FROM 0,0 TO 23,78
oBrw := TXBrowse():New( oWnd )

oBrw:bClrStd := {|| { CLR_BLUE, CLR_WHITE } }

oCol:=oBrw:AddCol()
oCol:bStrData:= {|| TEST->NAME }
oCol:cHeader       := "Name"
ocol:nWidth        := 200
oCol:bEditvalue        := { || TEST->NAME }
oCol:nEditType         := EDIT_GET
oCol:bonPostEdit       := { | oCol, uValue, nLastKey | If( nLastKey == 13, (TEST->NAME := uValue , obrw:refresh()),  nil )  }

oBrw:nMarqueeStyle       := MARQSTYLE_HIGHLCELL
oBrw:nColDividerStyle    := LINESTYLE_BLACK
oBrw:nRowDividerStyle    := LINESTYLE_BLACK
oBrw:lColDividerComplete := .t.
oBrw:SetRDD()

oBrw:bBookMark := {| n | iif( n == nil,TEST->(RecNo()), TEST->(dbgoto(n)) ) }  // Required!

oBrw:CreateFromCode()
ownd:oClient := oBrw

ACTIVATE WINDOW OWND

TEST->(DBCLOSEAREA())
ERASE ("TEST.DBF")
ERASE ("TEST.CDX")
return nil


[dutch]

Thanks Richard,

I'll try your recommend.

Regards,
Dutch

[nageswaragunupudi]

Mr Richard

I am testing your program and I am not facing any problem here. The edited value is correctly shown at the right place and browse painted correctly. I have already downloaded 8.04 but I think 8.04 and 8.03 may not be much different.

Refresh( .t. )'s intended behavior is to GoTop. Normally we should use Refresh only. We should use Refresh(.t.) when we want gotop also.

>
oBrw:bBookMark := {| n | iif( n == nil,TEST->(RecNo()), TEST->(dbgoto(n)) ) } // Required!
>

Actually this is not necessary. SetRDD assigns exactly the same code block to :bBookMark. Assigning it once again in our code is only a duplication.

Am I missing anything? Can you tell me how to reproduce your problem?

[Richard Chidiak]

Mr NageswaraRao

I am just editing at line name 8 and replacing the 8 with 3a value then enter, i can reproduce the problem every time. I am using standard fwh 8.03 and standard xbrowse from fwh not modified. Maybe your copy of xbrowse is different ?

Would you mind building the sample with standard xbrowse from fwh and let me know if you get the same result ? I have not yet installed fwh 8.04 (planned this week end) but as you said i guess there should not be a difference in xbrowse.

Thank you for your help

Richard

[nageswaragunupudi]

Mr Richard

>
I am just editing at line name 8 and replacing the 8 with 3a value then enter,
>
Yes this is what I have done. I always use FWH original code only for this forum postings. I have used 8.04 and now tested by linking with 8.03 xbrowse prg. both give me the same results.

You said you can not reproduce the problem always. So I shall also keep a watch and if this happens occassionally to me. It appears lot of improvement has been made recently in this area recently.

[Richard Chidiak]

Mr NageswaraRao

This is very strange. I reproduce the problem everytime.

In fact the problem appears everytime you try to set a lower key than your current one, i mean a key that should be displayed before.

What happens is the new line is diplayed at the proper place and at the previous line also which is bad.
in my sequence i had 1 , 2 ,34,5,6,7,8,9...
i replace 8 with 3a i should have 1,2,3,3a,4,5,6,7,9....
the 7 is replaced with 3a also this is causing the bad refresh

I hope i made it clear, did you try to set a lower key ? in case of a upper key that will force the page to change, refresh is OK

I agree that xbrowse has made a lot of improvements.

Thanks for the help,

Richard

[nageswaragunupudi]

Mr Richard

>
n fact the problem appears everytime you try to set a lower key than your current one, i mean a key that should be displayed before.
>
Yes. I have done that only. I have no issues
Anyway now i shall complie with 8.03 xbrowse code "once again". I shall get back in a few minutes

[nageswaragunupudi]

You are right.

With 8.03 I confirm your problem.
With 8.04 this is solved.

[nageswaragunupudi]

Incidentally I would also like to share with you how the new commands have simplified the coding.

Your earlier code

Code: Select all  Expand view  RUN

oBrw := TXBrowse():New( oWnd )

oBrw:bClrStd := {|| { CLR_BLUE, CLR_WHITE } }

oCol:=oBrw:AddCol()
oCol:bStrData:= {|| TEST->NAME }
oCol:cHeader       := "Name"
ocol:nWidth        := 200
oCol:bEditvalue        := { || TEST->NAME }
oCol:nEditType         := EDIT_GET
oCol:cSortOrder      := "NAME"
oCol:bonPostEdit       := { | oCol, uValue, nLastKey | If( nLastKey == 13, (TEST->NAME := uValue , obrw:refresh()),  nil )  }
(TEST->NAME := uValue ),  nil )  }

oBrw:SetRDD()

//oBrw:bBookMark := {| n | iif( n == nil,TEST->(RecNo()), TEST->(dbgoto(n)) ) }  // Required! // NOT REQUIRED


This can now be written as

Code: Select all  Expand view  RUN

@ 0,0 XBROWSE oBrw COLUMNS "Name" ALIAS "TEST" COLOR CLR_BLUE,CLR_WHITE
oCol := oBrw:aCols[ 1 ]
oCol:nEditType := EDIT_GET
oCol:bonPostEdit       := { | oCol, uValue, nLastKey | If( nLastKey == 13, ;
   (TEST->NAME := uValue , obrw:refresh()),  nil )  }


We get the same functionality

When you download 8.04 the present problem may not be there

[Richard Chidiak]

Thank you for taking time to test the problem

I am happy to know that this issue is solved in fwh 8.04, i will install this version today and report back

The new syntax is quite nice, i have used it also (not all of it since there are new commands in there)

Thanks again and best regards

Richard

[nageswaragunupudi]

Mr Richard

With 8.04
Before edit

After Edit


I hope this is what we want. Am I right ?

[Richard Chidiak]

Mr NageswaraRao

You are right, this is the correct behaviour

Though i will test and try to place at another line than first to see that there are no painting problems something in between 2 or 3 for instance

Richard

[nageswaragunupudi]

Mr Richard

Please see this


Is this okay ?