Another try for using the FWH debugger - some more questions

[driessen]

Hello,

Until now I never had any succes in using the FWH debugger.

This is the MAK-file I use:

Code: Select all | Expand

#Borland make sample, (c) FiveTech Software 2005-2009

HBDIR=c:\software\harbour
BCDIR=c:\progra~1\borland\bcc7
FWDIR=c:\software\fwharb

#change these paths as needed
.path.OBJ = .\obj
.path.PRG = .\
.path.CH  = $(FWDIR)\include;$(HBDIR)\include
.path.C   = .\
.path.RC  = .\

#important: Use Uppercase for filenames extensions, in the next two rules!

PRG =        \
BEHAGEN1.PRG \
BEHAGEN2.PRG \
BEHBOEK1.PRG \
BEHBOEK2.PRG \
BEHDOSS1.PRG \
BEHDOSS2.PRG \
BEHINTRX.PRG \
BEHPAAND.PRG \
BEHPARAM.PRG \
BEHPRARC.PRG \
BEHSOOR1.PRG \
BEHSOOR2.PRG \
BEHUSER.PRG  \
DOCWP1.PRG   \
DOCWP2.PRG   \
FGEGTL1.PRG  \
FGEGTL2.PRG  \
JUDA.PRG     \
MAKEIND.PRG  \
RAPAGPRE.PRG \
RAPDOSBH.PRG \
Z-ERROR1.PRG \
Z-RPREV.PRG  \
Z-WBROWS.PRG

C =        \
BEHAGEN1.C \
BEHAGEN2.C \
BEHBOEK1.C \
BEHBOEK2.C \
BEHDOSS1.C \
BEHDOSS2.C \
BEHINTRX.C \
BEHPAAND.C \
BEHPARAM.C \
BEHPRARC.C \
BEHSOOR1.C \
BEHSOOR2.C \
BEHUSER.C  \
DOCWP1.C   \
DOCWP2.C   \
FGEGTL1.C  \
FGEGTL2.C  \
JUDA.C     \
MAKEIND.C  \
RAPAGPRE.C \
RAPDOSBH.C \
Z-ERROR1.C \
Z-RPREV.C  \
Z-WBROWS.C

OBJ = $(PRGS:.PRG=.\OBJ)
OBJS = $(OBJ:.\=.\obj\)

PROJECT    : JUDA_2.EXE

#RES-file wordt door COMPRES.BAT aangemaakt
#JUDA_2.EXE  : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ) JUDA.RES
JUDA_2.EXE  : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ)
   echo off
   echo $(BCDIR)\lib\c0w32.obj + > b32.bc
#  echo $(OBJS), + >> b32.bc
   echo OBJ\BEHAGEN1.OBJ + >> b32.bc
   echo OBJ\BEHAGEN2.OBJ + >> b32.bc
   echo OBJ\BEHBOEK1.OBJ + >> b32.bc
   echo OBJ\BEHBOEK2.OBJ + >> b32.bc
   echo OBJ\BEHDOSS1.OBJ + >> b32.bc
   echo OBJ\BEHDOSS2.OBJ + >> b32.bc
   echo OBJ\BEHINTRX.OBJ + >> b32.bc
   echo OBJ\BEHPAAND.OBJ + >> b32.bc
   echo OBJ\BEHPARAM.OBJ + >> b32.bc
   echo OBJ\BEHPRARC.OBJ + >> b32.bc
   echo OBJ\BEHSOOR1.OBJ + >> b32.bc
   echo OBJ\BEHSOOR2.OBJ + >> b32.bc
   echo OBJ\BEHUSER.OBJ + >> b32.bc
   echo OBJ\DOCWP1.OBJ + >> b32.bc
   echo OBJ\DOCWP2.OBJ + >> b32.bc
   echo OBJ\FGEGTL1.OBJ + >> b32.bc
   echo OBJ\FGEGTL2.OBJ + >> b32.bc
   echo OBJ\JUDA.OBJ + >> b32.bc
   echo OBJ\MAKEIND.OBJ + >> b32.bc
   echo OBJ\RAPAGPRE.OBJ + >> b32.bc
   echo OBJ\RAPDOSBH.OBJ + >> b32.bc
   echo OBJ\Z-ERROR1.OBJ + >> b32.bc
   echo OBJ\Z-RPREV.OBJ + >> b32.bc
   echo OBJ\Z-WBROWS.OBJ, + >> b32.bc
 
   echo JUDA_2.EXE, + >> b32.bc
   echo JUDA_2.MAP, + >> b32.bc
   echo $(FWDIR)\lib\FiveH.lib $(FWDIR)\lib\FiveHC.lib + >> b32.bc
   echo $(HBDIR)\lib\hbrtl.lib + >> b32.bc
   echo $(HBDIR)\lib\hbvm.lib + >> b32.bc
   echo $(HBDIR)\lib\gtgui.lib + >> b32.bc
   echo $(HBDIR)\lib\hblang.lib + >> b32.bc
   echo $(HBDIR)\lib\hbmacro.lib + >> b32.bc
   echo $(HBDIR)\lib\hbrdd.lib + >> b32.bc
   echo $(HBDIR)\lib\rddntx.lib + >> b32.bc
   echo $(HBDIR)\lib\rddcdx.lib + >> b32.bc
   echo $(HBDIR)\lib\rddfpt.lib + >> b32.bc
   echo $(HBDIR)\lib\hbsix.lib + >> b32.bc
   echo $(HBDIR)\lib\hbdebug.lib + >> b32.bc
   echo $(HBDIR)\lib\hbcommon.lib + >> b32.bc
   echo $(HBDIR)\lib\hbpp.lib + >> b32.bc
   echo $(HBDIR)\lib\hbwin.lib + >> b32.bc
   echo $(HBDIR)\lib\hbcpage.lib + >> b32.bc
   echo $(HBDIR)\lib\hbct.lib + >> b32.bc
   echo $(HBDIR)\lib\png.lib + >> b32.bc
   echo $(HBDIR)\lib\hbcplr.lib + >> b32.bc
   echo $(HBDIR)\lib\xhb.lib + >> b32.bc
   echo $(HBDIR)\lib\hbtip.lib + >> b32.bc
   echo $(HBDIR)\lib\hbzlib.lib + >> b32.bc
   echo $(HBDIR)\lib\hbmzip.lib + >> b32.bc
   echo $(HBDIR)\lib\hbziparc.lib + >> b32.bc
   echo $(HBDIR)\lib\minizip.lib + >> b32.bc
   echo $(HBDIR)\lib\hbpcre.lib + >> b32.bc
   echo $(BCDIR)\lib\cw32.lib + >> b32.bc
   echo $(BCDIR)\lib\uuid.lib + >> b32.bc
   echo $(BCDIR)\lib\import32.lib + >> b32.bc
   echo $(BCDIR)\lib\ws2_32.lib + >> b32.bc
   echo $(BCDIR)\lib\wininet.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\odbc32.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\nddeapi.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\iphlpapi.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\msimg32.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\rasapi32.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\gdiplus.lib + >> b32.bc
   echo $(BCDIR)\lib\psdk\shell32.lib, >> b32.bc

   IF EXIST ..\RES\JUDA.RES echo ..\RES\JUDA.RES >> b32.bc
   $(BCDIR)\bin\ilink32 -Gn -aa -Tpe -s @b32.bc 

.PRG.OBJ:
  $(HBDIR)\bin\harbour $< /N /W0 /V /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include
  $(BCDIR)\bin\bcc32 -c -tWM -I$(HBDIR)\include -oobj\$& obj\$&.c

.C.OBJ:
  echo -c -tWM -D__HARBOUR__ -DHB_API_MACROS > tmp
  echo -I$(HBDIR)\include;$(FWDIR)\include >> tmp
  $(BCDIR)\bin\bcc32 -oobj\$& @tmp $&.c
  del tmp

#RES-file wordt door COMPRES.BAT aangemaakt
#JUDA.RES : ..\RES\JUDA.RC
#  $(BCDIR)\bin\brc32.exe -r ..\RES\JUDA.RC
 

This MAK-file is working just fine.

But can anyone tell me what changes I have to add to activate the FWH debugger?

Thank you very much in advance for any help.

[alerchster]

add /b in this line

Code: Select all | Expand

$(HBDIR)\bin\harbour $< /N /b /W0 /V /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include

[driessen]

Thank you very much for your help.

[driessen]

Hello,

As told before, I am able know to use the FWH debugger.

Earlier, I used the debugger of xHarbour Builder, but some parts were not working correctly.
To build in a stop, I put "ALTD()" in my source. The debugger stopped automatically at every ALTD().

In the FWH debugger, ALTD() doesn't seem to work.
What can be used in FWH debugger to stop at position where I want it to stop?

Thanks.

[Antonio Linares]

Dear Michel,

AltD( 1 ) // Enables the debugger. Press F5 to go

MsgInfo( "debugger enabled" )

AltD() // Invokes the debugger

MsgInfo( "debugger invoked" )

[driessen]

Fantastic, Antonio.
That is the info I needed.

[Marc Venken]

What is de debugger going to do ? Why use it ?

[driessen]

Mark,

With a debugger, the source is shown while it is executing. It is a very easy utility to help you find a logical error.