Problem with menus

Problem with menus

Postby driessen » Thu Feb 22, 2007 11:09 pm

Hello,

I have a problem with the menus of my main window.

The code is :

----------------------------
BuildMenu()
oWnd:SetMenu(oMenu)
----------------------------

I made a procedure BuildMenu() which reads the menus out of a file into oMenu.

The menus are set by : oWnd:SetMenu(oMenu).

I need to do this because, depending on some settings set by the user, the menus need to be changed.

That works fine until I passed these code lines between 10 or 15 times.

Then I can click on one of my menuitems, but nothing happens anymore.

The only thing I can do is quitting my application and restarting it. Then the menu is working fine again until I passed between 10 or 15 times the code I mentioned.

What is the reason for this problem and how can I solve it ?

Thanks.

Michel
Regards,

Michel D.
Genk (Belgium)
_____________________________________________________________________________________________
I use : FiveWin for (x)Harbour v. 24.07 - Harbour 3.2.0 (February 2024) - xHarbour Builder (January 2020) - Bcc773
User avatar
driessen
 
Posts: 1422
Joined: Mon Oct 10, 2005 11:26 am
Location: Genk, Belgium

Postby James Bott » Fri Feb 23, 2007 2:07 am

Michel,

>That works fine until I passed these code lines between 10 or 15 times.

I don't understand why you would read the menu more than once per run. Since it is the application's main window it is opened and remains open until the user quits the app.

James
User avatar
James Bott
 
Posts: 4840
Joined: Fri Nov 18, 2005 4:52 pm
Location: San Diego, California, USA

Postby Antonio Linares » Fri Feb 23, 2007 5:27 am

Michel,

Do you use:
Code: Select all  Expand view
MENU oMenu
   MENUITEM ...
   ...
ENDMENU

to build your menu from inside BuildMenu() ? Please show us a portion of your code, thanks
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 42077
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Postby driessen » Fri Feb 23, 2007 10:02 am

James,

The reason for the menu to be changed while running my application, has to do with priorities, but also with adding documents in menus that have been added, etc.

Antonio,

Here is the code I use :

Code: Select all  Expand view
FUNCTION BuildMenu1

   LOCAL OldPar := {ALIAS(),INDEXORD(),RECNO()}

   DeleteObject(oMenu)
   MEMORY(-1)
   SYSREFRESH()

   SELECT US
   SET ORDER TO 3
   SEEK(UPPER(nUser))

   oMenu := NIL

   MENU oMenu

        FOR i=1 TO 8
            IF i<> 4
               SELECT MEN
               SET ORDER TO i
            ELSE
               SELECT MENT
               SET ORDER TO 3
            ENDIF
            GO TOP
            IF !EOF() .AND. &("MEN"+IF(i=4,"T","")+"->MNNR") = i .AND. &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 0
               IF xPriority >= &("MEN"+IF(i=4,"T","")+"->MNPRIOR") .AND. (US->RSCHERM .OR. (!US->RSCHERM .AND. i <> 6))
                  MENUITEM &("oMenu"+STR(i,1,0)) PROMPT ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MN"+IF(i<>4 .OR. EMPTY(MENT->MNPOPTXT),"TEKST","POPTXT")))
                  MENU
                  SKIP
                  IF i = 4 .AND. MENT->MNSOORT = 3 ; SKIP ; ENDIF
                  DO WHILE !EOF() .AND. &("MEN"+IF(i=4,"T","")+"->MNNR") = i
                     IF ((xPriority >= &("MEN"+IF(i=4,"T","")+"->MNPRIOR")) .OR. (IF(i=4,.T.,MEN->MNPRIVE .AND. xBoekExt<>"PAR"))) .AND. ((i = 4 .OR. (i <> 4 .AND. ((PAR->BKWISSEL .AND. MEN->MNBOEKH .AND. (!EMPTY(US->UBOEPATH) .AND. ALLTRIM(US->UBOEPATH) <> "\") .OR. (PAR->DOSBOEKH .AND. DOSS->DOSBOEKH)) .OR. !MEN->MNBOEKH)))) .AND. (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 0 .OR. (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") <> 0)) .AND. (i =  4 .OR. (i <> 4 .AND. ((!US->RSCHERM .AND. i <> 6) .OR. (US->RSCHERM .AND. (i = 6 .OR. !MEN->MNSCHERM)))))
                        IF i<>4 .OR. !MENT->MNPOPACT
                           IF (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 0) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 1 .AND. PAR->OZDOSSIER) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 2 .AND. PAR->OZONDERW ) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 3 .AND. PAR->OZONDERV ) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 4 .AND. PAR->OZDATUM  ) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 5 .AND. PAR->OZNUMMER ) .OR. ;
                              (&("MEN"+IF(i=4,"T","")+"->MNSRTOPSL") = 6 .AND. (PAR->OZDOSSIER .OR. PAR->OZONDERW .OR. PAR->OZONDERV .OR. PAR->OZDATUM .OR. PAR->OZNUMMER))
                              IF i=4 .OR. (i<>4 .AND. (MEN->MNSRTBH = 0 .OR. ((((&(xBoekExt+"->SRTBOEKH") <> 2 .AND. MEN->MNSRTBH = 1) .OR. (&(xBoekExt+"->SRTBOEKH") = 2 .AND. MEN->MNSRTBH = 2))))))
                                 DO CASE
                                    CASE &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 1 ; VulMenu1(i) ; MENU
                                    CASE &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 2 ; VulMenu1(i)
                                    CASE &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 3 ; SEPARATOR
                                    CASE &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 4 ; ENDMENU
                                 ENDCASE
                              ENDIF
                           ENDIF
                        ENDIF
                     ENDIF
                     SKIP
                  ENDDO
                  ENDMENU
               ENDIF
            ENDIF
        NEXT

   ENDMENU

   SELECT(OldPar[1])
   SET ORDER TO OldPar[2]
   GOTO OldPar[3]

RETURN(.T.)

******************************************************************************

PROCEDURE VulMenu1(i)

   LOCAL cActie

   IF !EMPTY(cActie := &("MEN"+IF(i=4,"T","")+"->MNACTIE")) .AND. UPPER(LEFT(&("MEN"+IF(i=4,"T","")+"->MNACTIE"),1)) <> "*" .AND. UPPER(LEFT(&("MEN"+IF(i=4,"T","")+"->MNACTIE"),4)) <> "REM "
      IF i <> 4
         cActie := "{||StartSub(MEN->MNDISABLE)," + ALLTRIM(cActie) + ",EndSub(MEN->MNDISABLE)}"
      ELSE
         cActie := LEFT(ALLTRIM(cActie),LEN(ALLTRIM(cActie))-1) + ",OpenBase(.T.)}"
      ENDIF
      IF !EMPTY(&("MEN"+IF(i=4,"T","")+"->MNVIRTKEY"))
         IF i = 2 .AND. AT("TAALACT(1)",UPPER(MEN->MNACTIE)) <> 0
            MENUITEM ("Agendacontrole "+IF(US->UAGCONTR,"uitschakelen","inschakelen") + IF(!EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),"")) BLOCK &(cActie) ACCELERATOR MEN->MNSTATE,MEN->MNVIRTKEY
         ELSEIF i = 4 .AND. MENT->MNVOLGNR >= 9999978 .AND. MENT->MNVOLGNR <= 9999980
            MENUITEM (IF(MENT->MNVOLGNR=9999978,"Taalkeuze",IF(MENT->MNVOLGNR=9999979,"Taal spellingcontrole","Controle lettertekens"))+" "+IF((MENT->MNVOLGNR=9999978 .AND. US->UTXTTAAL) .OR. (MENT->MNVOLGNR=9999979 .AND. US->UTXTSPEL) .OR. (MENT->MNVOLGNR=9999980 .AND. US->UTXTFLET),"uitschakelen","activeren") + IF(!EMPTY(MENT->MNFKEY),CHR(9)+ALLTRIM(MENT->MNFKEY),"")) BLOCK &(cActie) ACCELERATOR MENT->MNSTATE,MENT->MNVIRTKEY
         ELSE
            MENUITEM (ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MN"+IF(i<>4 .OR. EMPTY(MENT->MNPOPTXT),"TEKST","POPTXT"))) + IF(!EMPTY(&("MEN"+IF(i=4,"T","")+"->MNFKEY")),CHR(9)+ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MNFKEY")),"")) BLOCK &(cActie) ACCELERATOR &("MEN"+IF(i=4,"T","")+"->MNSTATE"),&("MEN"+IF(i=4,"T","")+"->MNVIRTKEY")
         ENDIF
      ELSE
         IF i = 2 .AND. AT("TAALACT(1)",UPPER(MEN->MNACTIE)) <> 0
            MENUITEM ("Agendacontrole "+IF(US->UAGCONTR,"uitschakelen","inschakelen") + IF(!EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),"")) BLOCK &(cActie)
         ELSEIF i = 4 .AND. MENT->MNVOLGNR >= 9999978 .AND. MENT->MNVOLGNR <= 9999980
            MENUITEM (IF(MENT->MNVOLGNR=9999978,"Taalkeuze",IF(MENT->MNVOLGNR=9999979,"Taal spellingcontrole","Controle lettertekens"))+" "+IF((MENT->MNVOLGNR=9999978 .AND. US->UTXTTAAL) .OR. (MENT->MNVOLGNR=9999979 .AND. US->UTXTSPEL) .OR. (MENT->MNVOLGNR=9999980 .AND. US->UTXTFLET),"uitschakelen","activeren") + IF(!EMPTY(MENT->MNFKEY),CHR(9)+ALLTRIM(MENT->MNFKEY),"")) BLOCK &(cActie)
         ELSE
            MENUITEM (ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MN"+IF(i<>4 .OR. EMPTY(MENT->MNPOPTXT),"TEKST","POPTXT"))) + IF(!EMPTY(&("MEN"+IF(i=4,"T","")+"->MNFKEY")),CHR(9)+ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MNFKEY")),"")) BLOCK &(cActie)
         ENDIF
      ENDIF
   ELSE
      IF &("MEN"+IF(i=4,"T","")+"->MNSOORT") = 2
         IF i = 2 .AND. AT("TAALACT(1)",UPPER(MEN->MNACTIE)) <> 0
            MENUITEM ("Agendacontrole "+IF(US->UAGCONTR,"uitschakelen","inschakelen") + IF(!EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),"")) DISABLED
         ELSEIF i = 4 .AND. MENT->MNVOLGNR >= 9999978 .AND. MENT->MNVOLGNR <= 9999980
            MENUITEM (IF(MENT->MNVOLGNR=9999978,"Taalkeuze",IF(MENT->MNVOLGNR=9999979,"Taal spellingcontrole","Controle lettertekens"))+" "+IF((MENT->MNVOLGNR=9999978 .AND. US->UTXTTAAL) .OR. (MENT->MNVOLGNR=9999979 .AND. US->UTXTSPEL) .OR. (MENT->MNVOLGNR=9999980 .AND. US->UTXTFLET),"uitschakelen","activeren") + IF(!EMPTY(MENT->MNFKEY),CHR(9)+ALLTRIM(MENT->MNFKEY),"")) DISABLED
         ELSE
            MENUITEM (ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MN"+IF(i<>4 .OR. EMPTY(MENT->MNPOPTXT),"TEKST","POPTXT"))) + IF(i<>4 .AND. !EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),"")) DISABLED
         ENDIF
      ELSE
         IF i = 2 .AND. AT("TAALACT(1)",UPPER(MEN->MNACTIE)) <> 0
            MENUITEM ("Agendacontrole "+IF(US->UAGCONTR,"uitschakelen","inschakelen") + IF(!EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),""))
         ELSEIF i = 4 .AND. MENT->MNVOLGNR >= 9999978 .AND. MENT->MNVOLGNR <= 9999980
            MENUITEM (IF(MENT->MNVOLGNR=9999978,"Taalkeuze",IF(MENT->MNVOLGNR=9999979,"Taal spellingcontrole","Controle lettertekens"))+" "+IF((MENT->MNVOLGNR=9999978 .AND. US->UTXTTAAL) .OR. (MENT->MNVOLGNR=9999979 .AND. US->UTXTSPEL) .OR. (MENT->MNVOLGNR=9999980 .AND. US->UTXTFLET),"uitschakelen","activeren") + IF(!EMPTY(MENT->MNFKEY),CHR(9)+ALLTRIM(MENT->MNFKEY),""))
         ELSE
            MENUITEM (ALLTRIM(&("MEN"+IF(i=4,"T","")+"->MN"+IF(i<>4 .OR. EMPTY(MENT->MNPOPTXT),"TEKST","POPTXT"))) + IF(i<>4 .AND. !EMPTY(MEN->MNFKEY),CHR(9)+ALLTRIM(MEN->MNFKEY),""))
         ENDIF
      ENDIF
   ENDIF

RETURN

******************************************************************************


I hope you can understand what I mean.

Thank you.

Michel
Regards,

Michel D.
Genk (Belgium)
_____________________________________________________________________________________________
I use : FiveWin for (x)Harbour v. 24.07 - Harbour 3.2.0 (February 2024) - xHarbour Builder (January 2020) - Bcc773
User avatar
driessen
 
Posts: 1422
Joined: Mon Oct 10, 2005 11:26 am
Location: Genk, Belgium

Postby Antonio Linares » Fri Feb 23, 2007 3:57 pm

Michel,

Please modify your code so your function returns the new oMenu object:

oWnd:SetMenu( BuildMenu() )

and declare oMenu as a local inside BuildMenu() that is finally returned: return oMenu
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 42077
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain

Postby driessen » Sat Feb 24, 2007 12:04 pm

Antonio,

Thanks for your answer.

I changed the code as you told me to but if the "osetmenu" sentence is executed between 10 and 15 times, the menuitems don't work anymore.

Have a nice weekend.

Michel
Regards,

Michel D.
Genk (Belgium)
_____________________________________________________________________________________________
I use : FiveWin for (x)Harbour v. 24.07 - Harbour 3.2.0 (February 2024) - xHarbour Builder (January 2020) - Bcc773
User avatar
driessen
 
Posts: 1422
Joined: Mon Oct 10, 2005 11:26 am
Location: Genk, Belgium

Postby Antonio Linares » Sat Feb 24, 2007 12:59 pm

Michel,

Please test this sample, it seems to work fine:
Code: Select all  Expand view
#include "FiveWin.ch"

function Main()

   local oWnd, oBar

   DEFINE WINDOW oWnd TITLE "Menus Test" ;
      MENU BuildMenu()

   DEFINE BUTTONBAR oBar OF oWnd 3D

   DEFINE BUTTON OF oBar ACTION oWnd:SetMenu( BuildMenu() )

   ACTIVATE WINDOW oWnd

return nil

function BuildMenu()

   local oMenu

   MENU oMenu
      MENUITEM "Test"
      MENU
         MENUITEM "One"   ACTION MsgInfo( "One" )
         MENUITEM "Two"   ACTION MsgInfo( "Two" )
         MENUITEM "Three" ACTION MsgInfo( "Three" )
      ENDMENU
   ENDMENU

return oMenu
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Antonio Linares
Site Admin
 
Posts: 42077
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain


Return to FiveWin for Harbour/xHarbour

Who is online

Users browsing this forum: No registered users and 56 guests