problem after update

[Detlef Hoefner]

Hi Antonio,

i updated this morning to FWH version 7.05.
When trying to compile and run your sample winpop3.prg i get the following error window:

---------------------------
Unrecoverable error 9000:
---------------------------
'ACTIVEX.PRG' was compiled by older version, PCODE version 9 is no longer supported - Please recompile.

I use xHarbour 0.99.70 and i'm not aware of any ActiveX call in this sample.
What could be wrong?

Best regards,
Detlef

[Detlef Hoefner]

btw,
this error appears withe every sample i try to build and start.

[carlos vargas]

this is: the pcode of the .prg library is diferent of pcode of your source application.

you have two option:

1.-You have recompile all source (.prg) of fivewin for harbour library with the current xharbour compiler. (recreate the fwh library)

or

2.-You have use the xharbour compiler version with building the fivewin harbour library. (change the xharbour compiler what use)

sorry for my very terrible english

the spanish is my native language.

salu2
carlos vargas

[Antonio Linares]

Detlef,

Please use the xHarbour build that we provide with FWH, thanks

[Detlef Hoefner]

Carlos,

thank you very much for your advices.
I understand you well and i'll try them.

Best regards,
Detlef

[Detlef Hoefner]

Antonio,

Detlef,

Please use the xHarbour build that we provide with FWH, thanks

After purchasing the FWH upgrade i downloaded first the FWH from your site and after i downloaded the xHarbour binaries by using the link at your site.

Did i make something wrong?

Regards,
Detlef

[Richard Chidiak]

Detlef

If you are using borland compiler, the downloads are ok

If you are using xharbour.com (xbuild), you need to download the RC12 from xharbour.com web site

Hth

Richard

[Antonio Linares]

Detlef,

Please check that you don't have another xharbour build on your computer and that you are using the right one. Check your used paths

[Detlef Hoefner]

Dear friends,

i finally got everything working.
After rebuilding the FiveWin lib the job was done.

Is there a make script or batch file somewhere to build the fwh libraries?
For the moment i'm using a xMate project.
But with every new FWH version new files have to be added to the library.

Thanks for all your help.
Detlef

[Antonio Linares]

Detlef,

FWH works ok with the FiveTech provided xHarbour build.

Were you using a most recent xHarbour CVS files ?

[Detlef Hoefner]

Antonio,

i don't use any CSV files.

I only downloaded the recent FWH and followed the link:
XHARBOUR (Borland) - http://fivetechsoft.com/files/xharbour.exe
on your download page.

Regards,
Detlef

[Antonio Linares]

Detlef,

We just downloaded FWH and xHarbour from our FTP, installed it a on a computer and it properly built the samples without any error

Please try to build samples\tutor02.prg or samples\webexp.prg

Are you using any library that may be compiled with a previous xHarbour build ?

[Detlef Hoefner]

Antonio,

i did not download xHarbour and FWH from your FTP server.

Anyhow, now it's working after rebuilding my FWH libs.
I'd just like to know if there is a link script or make file for building the FWH libraries.

Regards,
Detlef

[Antonio Linares]

Detlef,

The download address that we provided you is our FTP server

You may use this batch file to rebuild the library (PRGs):

for %%f in (*.prg) do c:\harbour\bin\harbour %%f /n /ic:\fwh\include;c:\harbour\include
for %%f in (*.c) do c:\bcc55\bin\bcc32 -c -Ic:\bcc55\include;c:\harbour\include %%f
for %%f in (*.obj) do c:\bcc55\bin\tlib fiveh.lib -+ %%f /0 /P32,,

[Detlef Hoefner]

Thanks, Antonio