start at the end and go back in an array - RESOLVED --

[Silvio.Falconi]

I have an array and I make this operation from record 1 to 10087

AEval( aData, { |a| If( a[ nPos1 ] == numero .or. ;
a[ nPos2 ] == numero .or. ;
a[ nPos3 ] == numero .or. ;
a[ nPos4 ] == numero .or. ;
a[ nPos5 ] == numero , nCount++, nil ) } )

Now I wish start at the end and go back
basically I want go to bottom() and make to skip (-1) up to a certain record
How I can resolve ?

[Otto]

Silvio,
Just a question.
Why do you use AEVAL and not just FOR NEXT?
I think AEVAL is only for ARRAY professionals.
And it doesn't bring anything except shorter code that only occasional users don't understand right away.
Best regards,
Otto

[Antonio Linares]

Dear Silvio,

Same as we have a RAScan() we should have a RAEval(). It is not difficult to implement it and we can do it
Unless there is a function AReverse() (also missing) that I am not aware of.

Dear Otto,

AEval(), AScan(), etc. are much faster than using for ... next loops as they don't use pcode for the loops.

[Antonio Linares]

Dear Silvio,

Mr. Rao has already implemented RAEval() in a very simple way To be included in the next FWH build

Code: Select all  Expand view

function FW_RAEval( aArray, bBlock, nStart, nCount )

   local nPos  := IfNil( nStart, Len( aArray ) )

   RAScan( aArray, { |u| Eval( bBlock, u, nPos ), nPos--, .f. }, nStart, nCount )

return aArray

[Silvio.Falconi]

Dear Silvio,

Mr. Rao has already implemented RAEval() in a very simple way To be included in the next FWH build

Code: Select all  Expand view

function FW_RAEval( aArray, bBlock, nStart, nCount )

   local nPos  := IfNil( nStart, Len( aArray ) )

   RAScan( aArray, { |u| Eval( bBlock, u, nPos ), nPos--, .f. }, nStart, nCount )

return aArray

Antonio,
I not Understood how I can make to converte my function and use an array instead dbf I explain you

My Function ( it it slows down enough)

Code: Select all  Expand view

Function Ritardo(numero,nrecord,nRuota)
        local oDbfRit,cond
        local r1,r2,r3,r4,r5
        local nritardo:=0
        local nOldArea := select()
        local cDir:=".\data\"

        do case
      case nRuota = 1
         r1:= "BA1"
         r2:= "BA2"
         r3:= "BA3"
         r4:= "BA4"
         r5:= "BA5"
            case nRuota = 2
         r1:= "CA1"
         r2:= "CA2"
         r3:= "CA3"
         r4:= "CA4"
         r5:= "CA5"
           case nRuota = 3
         r1:= "FI1"
         r2:= "FI2"
         r3:= "FI3"
         r4:= "FI4"
         r5:= "FI5"
          case nRuota = 4
         r1:= "GE1"
         r2:= "GE2"
         r3:= "GE3"
         r4:= "GE4"
         r5:= "GE5"
       case nRuota = 5
         r1:= "MI1"
         r2:= "MI2"
         r3:= "MI3"
         r4:= "MI4"
         r5:= "MI5"
         case nRuota = 6
         r1:= "NA1"
         r2:= "NA2"
         r3:= "NA3"
         r4:= "NA4"
         r5:= "NA5"
       case nRuota = 7
         r1:= "PA1"
         r2:= "PA2"
         r3:= "PA3"
         r4:= "PA4"
         r5:= "PA5"
      case nRuota = 8
         r1:= "RM1"
         r2:= "RM2"
         r3:= "RM3"
         r4:= "RM4"
         r5:= "RM5"
       case nRuota = 9
         r1:= "TO1"
         r2:= "TO2"
         r3:= "TO3"
         r4:= "TO4"
         r5:= "TO5"
      case nRuota = 10
         r1:= "VE1"
         r2:= "VE2"
         r3:= "VE3"
         r4:= "VE4"
         r5:= "VE5"
      case nRuota = 11
         r1:= "NZ1"
         r2:= "NZ2"
         r3:= "NZ3"
         r4:= "NZ4"
         r5:= "NZ5"
      endcase

       oDbfRit:= TDatabase():Open( , cDir+"lotto", "DBFCDX", .T. )
       oDbfRit:setorder(0)
       oDbfRit:goto(nRecord-1)


      Do while .not. oDbfRit:eof()

                cond:= oDbfRit:&r1  = numero .OR. ;
                       oDbfRit:&r2  = numero .OR. ;
                       oDbfRit:&r3  = numero .OR. ;
                       oDbfRit:&r4  = numero .OR. ;
                       oDbfRit:&r5  = numero
                If cond

                   exit
                else
                    nritardo:= nritardo + 1
                endif
                oDbfRit:skip(-1)

             enddo
             oDbfRit:close()
             select(nOldArea )
      return  nritardo
//-------------------------------------------------------------//

With array ( but this cycle always advances one record)

Function Delay(aData, numero, nWheel)
local nPos1,nPos2,nPos3,nPos4,nPos5

Do case
case nWheel = 1
nPos1:= 3
nPos2:= 4
nPos3:= 5
nPos4:= 6
nPos5:= 7
case nWheel = 2
nPos1:= 8
nPos2:= 9
nPos3:= 10
nPos4:= 11
nPos5:= 12
case nWheel = 3
nPos1:= 13
nPos2:= 14
nPos3:= 15
nPos4:= 16
nPos5:= 17
case nWheel = 4
nPos1:= 18
nPos2:= 19
nPos3:= 20
nPos4:= 21
nPos5:= 22
case nWheel = 5
nPos1:= 23
nPos2:= 24
nPos3:= 25
nPos4:= 26
nPos5:= 27
case nWheel = 6
nPos1:= 28
nPos2:= 29
nPos3:= 30
nPos4:= 31
nPos5:= 32

case nWheel = 7
nPos1:= 33
nPos2:= 34
nPos3:= 35
nPos4:= 36
nPos5:= 37
case nWheel = 8
nPos1:= 38
nPos2:= 39
nPos3:= 40
nPos4:= 41
nPos5:= 42
case nWheel = 9
nPos1:= 43
nPos2:= 44
nPos3:= 45
nPos4:= 46
nPos5:= 47
case nWheel = 10
nPos1:= 48
nPos2:= 49
nPos3:= 50
nPos4:= 51
nPos5:= 52
case nWheel = 11
nPos1:= 53
nPos2:= 54
nPos3:= 55
nPos4:= 56
nPos5:= 57
Endcase

but this cycle always advances one record
How I can to go back ? i.e. skip -1

AEval( aData, { |a| If( a[ nPos1 ] == numero .or. ;
a[ nPos2 ] == numero .or. ;
a[ nPos3 ] == numero .or. ;
a[ nPos4 ] == numero .or. ;
a[ nPos5 ] == numero , nCount++, nil ) } )

return nCount

[Otto]

Dear Antonio,

RAScan( )
R - What does the abbreviation stand for?

Best regards,
Otto

[Detlef]

I think it's for 'reverse'.

[Antonio Linares]

Yes, Detlef is correct. It stands for "reverse"

The same way, RAEval() would stand for reverse AEval()

[Silvio.Falconi]

Yes, Detlef is correct. It stands for "reverse"

The same way, RAEval() would stand for reverse AEval()

Antonio,
the function run bad or I not set right ...

I Insert also the old function Ritardo() made with dbf ( I send you the new lotto.dbf)

the number delay must be 24 as the result of old function Ritardo()

the new function Rit () made with fw_eval not run ok

the code

Code: Select all  Expand view

#include "fivewin.ch"

Function test()
local oDbf,aDatadbf
local number,nRecord
local nDelay
local cDir:=".\data\"

   oDbf:=TDatabase():Open( , cDir+"lotto", "DBFCDX", .T. )
   oDbf:setorder(1)
   oDbf:gobottom()
   nrecord:=oDbf:recno() //for old function

   aDataDbf:=oDbf:DbfToArray()
   number:=oDbf:ba1

   //New with array
   nDelay:= Rit( aDataDbf, number, 1, nrecord )

   ?nDelay, "New array function"

 // Old with dbf
   nDelay:= Ritardo(number,nrecord,1)

?nDelay,"Old right function"

Return nil

Function Rit( aData, numero, nWheel, nstart )
   local nCount   := 0
   local nPos1,nPos2,nPos3,nPos4,nPos5

   Do case
     case  nWheel = 1
        nPos1:= 3
        nPos2:= 4
        nPos3:= 5
        nPos4:= 6
        nPos5:= 7
     case  nWheel = 2
        nPos1:= 8
        nPos2:= 9
        nPos3:= 10
        nPos4:= 11
        nPos5:= 12
    case  nWheel = 3
        nPos1:= 13
        nPos2:= 14
        nPos3:= 15
        nPos4:= 16
        nPos5:= 17
    case  nWheel = 4
        nPos1:= 18
        nPos2:= 19
        nPos3:= 20
        nPos4:= 21
        nPos5:= 22
     case  nWheel = 5
        nPos1:= 23
        nPos2:= 24
        nPos3:= 25
        nPos4:= 26
        nPos5:= 27
    case  nWheel = 6
        nPos1:= 28
        nPos2:= 29
        nPos3:= 30
        nPos4:= 31
        nPos5:= 32

    case  nWheel = 7
        nPos1:= 33
        nPos2:= 34
        nPos3:= 35
        nPos4:= 36
        nPos5:= 37
    case  nWheel = 8
        nPos1:= 38
        nPos2:= 39
        nPos3:= 40
        nPos4:= 41
        nPos5:= 42
      case  nWheel = 9
        nPos1:= 43
        nPos2:= 44
        nPos3:= 45
        nPos4:= 46
        nPos5:= 47
    case  nWheel = 10
        nPos1:= 48
        nPos2:= 49
        nPos3:= 50
        nPos4:= 51
        nPos5:= 52
     case  nWheel = 11
        nPos1:= 53
        nPos2:= 54
        nPos3:= 55
        nPos4:= 56
        nPos5:= 57
     Endcase

 array:=  FW_RAEval( aData, { |a| If( a[ nPos1 ]   == numero .or. ;
                           a[ nPos2 ] == numero .or. ;
                           a[ nPos3 ] == numero .or. ;
                           a[ nPos4 ] == numero .or. ;
                           a[ nPos5 ] == numero  , ,nCount++) }, nstart )

 xbrowser array
   return nCount





function FW_RAEval( aArray, bBlock, nStart, nCount )

   local nPos  := IfNil( nStart, Len( aArray ) )

   RAScan( aArray, { |u| Eval( bBlock, u, nPos ), nPos--, .f. }, nStart, nCount )

   return aArray



 //OLD FUNCTION
 Function Ritardo(numero,nrecord,nRuota)
        local oDbfRit,cond
        local r1,r2,r3,r4,r5
        local nritardo:=0
        local nOldArea := select()
        local cDir:=".\data\"

        do case
      case nRuota = 1
         r1:= "BA1"
         r2:= "BA2"
         r3:= "BA3"
         r4:= "BA4"
         r5:= "BA5"
            case nRuota = 2
         r1:= "CA1"
         r2:= "CA2"
         r3:= "CA3"
         r4:= "CA4"
         r5:= "CA5"
           case nRuota = 3
         r1:= "FI1"
         r2:= "FI2"
         r3:= "FI3"
         r4:= "FI4"
         r5:= "FI5"
          case nRuota = 4
         r1:= "GE1"
         r2:= "GE2"
         r3:= "GE3"
         r4:= "GE4"
         r5:= "GE5"
       case nRuota = 5
         r1:= "MI1"
         r2:= "MI2"
         r3:= "MI3"
         r4:= "MI4"
         r5:= "MI5"
         case nRuota = 6
         r1:= "NA1"
         r2:= "NA2"
         r3:= "NA3"
         r4:= "NA4"
         r5:= "NA5"
       case nRuota = 7
         r1:= "PA1"
         r2:= "PA2"
         r3:= "PA3"
         r4:= "PA4"
         r5:= "PA5"
      case nRuota = 8
         r1:= "RM1"
         r2:= "RM2"
         r3:= "RM3"
         r4:= "RM4"
         r5:= "RM5"
       case nRuota = 9
         r1:= "TO1"
         r2:= "TO2"
         r3:= "TO3"
         r4:= "TO4"
         r5:= "TO5"
      case nRuota = 10
         r1:= "VE1"
         r2:= "VE2"
         r3:= "VE3"
         r4:= "VE4"
         r5:= "VE5"
      case nRuota = 11
         r1:= "NZ1"
         r2:= "NZ2"
         r3:= "NZ3"
         r4:= "NZ4"
         r5:= "NZ5"
      endcase

       oDbfRit:= TDatabase():Open( , cDir+"lotto", "DBFCDX", .T. )
       oDbfRit:setorder(0)
       oDbfRit:goto(nRecord-1)


      Do while .not. oDbfRit:eof()

                cond:= oDbfRit:&r1  = numero .OR. ;
                       oDbfRit:&r2  = numero .OR. ;
                       oDbfRit:&r3  = numero .OR. ;
                       oDbfRit:&r4  = numero .OR. ;
                       oDbfRit:&r5  = numero
                If cond

                   exit
                else
                    nritardo:= nritardo + 1
                 endif

                oDbfRit:skip(-1)

             enddo
             oDbfRit:close()
             select(nOldArea )
      return  nritardo
//-------------------------------------------------------------//

probable I not understood how run it ...

[Detlef]

Hi Silvo,

I have no solution for your problem because for the moment I've not time enough to be occupied with your complex materials.
But to code more efficient I would replace

Do case
case nWheel = 1
nPos1:= 3
nPos2:= 4
nPos3:= 5
nPos4:= 6
nPos5:= 7
case nWheel = 2
nPos1:= 8
nPos2:= 9
nPos3:= 10
nPos4:= 11
nPos5:= 12
case nWheel = 3
nPos1:= 13
nPos2:= 14
nPos3:= 15
nPos4:= 16
nPos5:= 17
case nWheel = 4
nPos1:= 18
nPos2:= 19
nPos3:= 20
nPos4:= 21
nPos5:= 22
case nWheel = 5
nPos1:= 23
nPos2:= 24
nPos3:= 25
nPos4:= 26
nPos5:= 27
case nWheel = 6
nPos1:= 28
nPos2:= 29
nPos3:= 30
nPos4:= 31
nPos5:= 32

case nWheel = 7
nPos1:= 33
nPos2:= 34
nPos3:= 35
nPos4:= 36
nPos5:= 37
case nWheel = 8
nPos1:= 38
nPos2:= 39
nPos3:= 40
nPos4:= 41
nPos5:= 42
case nWheel = 9
nPos1:= 43
nPos2:= 44
nPos3:= 45
nPos4:= 46
nPos5:= 47
case nWheel = 10
nPos1:= 48
nPos2:= 49
nPos3:= 50
nPos4:= 51
nPos5:= 52
case nWheel = 11
nPos1:= 53
nPos2:= 54
nPos3:= 55
nPos4:= 56
nPos5:= 57
Endcase

with these 5 lines:

Code: Select all  Expand view

      nPos1 := ( nWheel - 1 ) * 5 + 3
      nPos2 := ( nWheel - 1 ) * 5 + 4
      nPos3 := ( nWheel - 1 ) * 5 + 5
      nPos4 := ( nWheel - 1 ) * 5 + 6
      nPos5 := ( nWheel - 1 ) * 5 + 7
 

Regards, Detlef

[Silvio.Falconi]

the frequency run ok

Code: Select all  Expand view

Function freq( aData, numero, nWheel )
   local nCount   := 0
   local nPos1,nPos2,nPos3,nPos4,nPos5

      nPos1 := ( nWheel - 1 ) * 5 + 3
      nPos2 := ( nWheel - 1 ) * 5 + 4
      nPos3 := ( nWheel - 1 ) * 5 + 5
      nPos4 := ( nWheel - 1 ) * 5 + 6
      nPos5 := ( nWheel - 1 ) * 5 + 7

   AEval( aData, { |a| If( a[ nPos1 ]   == numero .or. ;
                           a[ nPos2 ] == numero .or. ;
                           a[ nPos3 ] == numero .or. ;
                           a[ nPos4 ] == numero .or. ;
                           a[ nPos5 ] == numero  , nCount++, nil ) } )

   return nCount


 

the delay is the inverse from bottom skip -1 to where it found the number

With dbf the function is

Code: Select all  Expand view

Function Ritardo(numero,nrecord,nRuota)
        local oDbfRit,cond
        local r1,r2,r3,r4,r5
        local nritardo:=0
        local nOldArea := select()
        local cDir:=".\data\"

        do case
      case nRuota = 1
         r1:= "BA1"
         r2:= "BA2"
         r3:= "BA3"
         r4:= "BA4"
         r5:= "BA5"
            case nRuota = 2
         r1:= "CA1"
         r2:= "CA2"
         r3:= "CA3"
         r4:= "CA4"
         r5:= "CA5"
           case nRuota = 3
         r1:= "FI1"
         r2:= "FI2"
         r3:= "FI3"
         r4:= "FI4"
         r5:= "FI5"
          case nRuota = 4
         r1:= "GE1"
         r2:= "GE2"
         r3:= "GE3"
         r4:= "GE4"
         r5:= "GE5"
       case nRuota = 5
         r1:= "MI1"
         r2:= "MI2"
         r3:= "MI3"
         r4:= "MI4"
         r5:= "MI5"
         case nRuota = 6
         r1:= "NA1"
         r2:= "NA2"
         r3:= "NA3"
         r4:= "NA4"
         r5:= "NA5"
       case nRuota = 7
         r1:= "PA1"
         r2:= "PA2"
         r3:= "PA3"
         r4:= "PA4"
         r5:= "PA5"
      case nRuota = 8
         r1:= "RM1"
         r2:= "RM2"
         r3:= "RM3"
         r4:= "RM4"
         r5:= "RM5"
       case nRuota = 9
         r1:= "TO1"
         r2:= "TO2"
         r3:= "TO3"
         r4:= "TO4"
         r5:= "TO5"
      case nRuota = 10
         r1:= "VE1"
         r2:= "VE2"
         r3:= "VE3"
         r4:= "VE4"
         r5:= "VE5"
      case nRuota = 11
         r1:= "NZ1"
         r2:= "NZ2"
         r3:= "NZ3"
         r4:= "NZ4"
         r5:= "NZ5"
      endcase

       oDbfRit:= TDatabase():Open( , cDir+"lotto", "DBFCDX", .T. )
       oDbfRit:setorder(0)
       oDbfRit:goto(nRecord-1)


      Do while .not. oDbfRit:eof()

                cond:= oDbfRit:&r1  = numero .OR. ;
                       oDbfRit:&r2  = numero .OR. ;
                       oDbfRit:&r3  = numero .OR. ;
                       oDbfRit:&r4  = numero .OR. ;
                       oDbfRit:&r5  = numero
                If cond

                   exit
                else
                    nritardo:= nritardo + 1
                endif
                oDbfRit:skip(-1)

             enddo
             oDbfRit:close()
             select(nOldArea )
      return  nritardo
//-------------------------------------------------------------//

I wish create if with array because can be also more fast

[Otto]

Why don't you post theARRAY or the database?

[Silvio.Falconi]

I send you to another post the array of this year

Code: Select all  Expand view

function aData_array()
return ;
{  {"22 ",SToD("20220219"),23,36,68,10,49,29,28,21,50,7,27,30,20,25,62,3,81,22,90,13,14,22,31,61,62,14,71,46,21,74,82,59,90,79,83,82,15,87,75,51,82,76,74,68,24,77,6,7,26,55,15,71,77,36,43} ;
,  {"23 ",SToD("20220222"),35,83,47,74,62,43,44,42,71,31,88,36,32,28,45,14,11,21,24,76,7,52,64,57,24,6,71,35,53,23,77,21,55,47,65,55,89,19,76,75,81,60,63,44,31,10,72,80,63,39,21,66,28,48,45} ;
,  {"24 ",SToD("20220224"),46,74,32,68,79,82,25,51,79,44,75,65,63,66,43,61,2,75,65,24,64,12,60,56,34,57,64,84,53,42,41,21,17,76,68,36,33,54,14,38,3,87,29,13,15,67,11,53,89,71,80,27,63,86,11} ;
,  {"25 ",SToD("20220226"),87,47,69,31,79,56,32,20,21,19,56,84,15,13,37,24,5,69,39,21,89,36,54,55,12,58,40,72,78,14,63,39,9,32,15,28,46,11,68,29,24,85,42,19,67,13,89,72,88,56,31,33,54,21,47} ;
,  {"26 ",SToD("20220301"),61,68,49,75,71,24,54,52,71,79,54,72,60,46,75,89,69,53,74,76,88,30,22,48,1,5,17,88,44,60,78,2,51,5,8,72,67,24,34,82,49,30,51,11,87,14,31,60,25,21,62,1,16,43,12} ;
,  {"27 ",SToD("20220303"),11,57,56,66,60,17,5,4,14,81,48,72,74,59,39,26,90,57,70,59,18,33,52,28,38,59,50,18,9,12,47,29,16,55,73,75,90,85,45,82,1,2,68,79,16,52,48,46,37,81,35,45,20,44,31} ;
,  {"28 ",SToD("20220305"),89,26,36,1,68,20,39,40,11,41,65,15,30,78,62,83,48,81,56,28,6,76,32,12,26,16,32,69,14,38,71,63,87,54,12,36,49,71,81,76,35,6,70,42,59,18,46,41,76,33,22,75,54,76,14} ;
,  {"29 ",SToD("20220308"),8,62,44,12,79,33,29,28,74,64,30,24,2,55,36,71,28,34,64,60,40,20,82,85,57,6,69,54,70,24,36,42,68,21,10,36,77,88,42,27,81,6,2,16,25,82,39,17,51,43,15,9,37,69,54} ;
,  {"30 ",SToD("20220310"),73,53,45,37,87,24,69,19,84,73,61,80,45,29,40,27,28,42,87,49,2,88,6,4,75,29,4,50,33,83,14,30,77,72,42,3,48,68,39,43,23,7,77,84,89,90,84,78,56,41,16,40,22,83,62} ;
,  {"31 ",SToD("20220312"),7,17,77,76,86,86,22,19,65,40,55,63,14,80,33,17,35,85,9,7,52,18,12,47,1,11,49,21,72,55,21,2,81,50,61,27,53,77,57,49,62,87,76,24,35,90,65,56,74,31,71,51,20,79,77} ;
,  {"32 ",SToD("20220315"),49,27,37,45,57,23,34,31,78,52,18,62,1,75,23,6,28,76,41,75,48,3,13,14,67,74,23,51,37,35,89,59,60,58,67,40,42,24,65,10,38,12,59,65,64,41,29,32,10,26,2,31,11,14,58} ;
,  {"33 ",SToD("20220317"),10,17,28,19,87,75,26,52,22,20,66,7,45,59,17,85,4,41,36,78,61,55,9,56,49,41,68,10,27,54,83,49,7,31,10,56,66,40,23,47,35,79,49,51,66,48,1,37,16,86,49,79,22,3,30} ;
,  {"34 ",SToD("20220319"),48,35,64,14,38,90,73,42,66,46,6,51,68,41,64,63,13,25,75,65,67,2,38,18,40,25,64,66,82,7,10,69,43,51,62,74,55,29,28,45,78,3,70,50,55,46,41,64,57,70,45,70,54,35,85} ;
,  {"35 ",SToD("20220322"),22,30,16,88,29,11,21,73,67,59,69,82,44,59,1,27,74,84,45,58,65,77,40,64,30,15,75,59,2,88,89,74,59,56,88,57,36,73,56,72,39,61,78,70,27,7,57,79,52,82,51,79,55,7,41} ;
,  {"36 ",SToD("20220324"),53,45,61,17,56,39,31,72,17,73,73,56,9,37,82,62,35,39,29,3,48,33,9,69,65,26,58,57,30,37,12,85,40,31,67,89,24,79,82,59,44,2,49,74,63,46,76,82,10,23,10,50,6,25,27} ;
,  {"37 ",SToD("20220326"),28,61,20,37,39,52,65,75,35,46,61,34,15,48,67,64,43,7,75,55,61,5,69,40,76,61,49,83,36,67,83,29,74,30,90,7,6,14,23,32,29,84,1,5,20,64,85,22,65,90,28,51,46,27,38} ;
,  {"38 ",SToD("20220329"),54,89,4,57,88,17,2,12,67,31,49,24,52,19,51,61,58,3,1,63,29,56,73,82,11,17,49,31,44,88,83,21,55,29,23,23,42,14,71,87,17,19,81,13,36,41,90,10,74,45,29,18,7,72,61} ;
,  {"39 ",SToD("20220331"),41,29,58,24,50,67,36,21,47,87,63,45,53,58,69,68,80,31,56,87,28,87,10,3,70,71,35,62,36,28,29,87,34,85,25,62,84,11,45,76,3,16,53,72,5,11,75,35,54,73,6,15,80,77,64} ;
,  {"40 ",SToD("20220402"),35,41,38,6,73,11,49,84,54,80,54,1,27,16,57,4,66,74,85,31,35,24,85,80,39,65,62,64,84,74,72,19,47,26,62,29,79,18,75,77,79,42,1,56,32,44,7,5,68,54,54,62,77,85,88} ;
,  {"41 ",SToD("20220405"),28,48,17,46,7,14,78,86,76,21,15,33,4,53,75,44,10,11,65,48,18,52,21,27,51,35,11,42,15,51,62,87,8,68,19,31,5,77,76,60,79,54,6,78,81,10,13,70,44,85,15,19,14,2,24} ;
,  {"42 ",SToD("20220407"),85,29,78,75,87,58,81,80,78,16,20,31,33,46,12,54,79,32,77,40,64,23,61,90,77,84,22,69,54,37,58,17,87,76,70,4,25,66,27,19,90,26,69,65,72,33,43,11,89,79,60,13,71,61,35} ;
,  {"43 ",SToD("20220409"),25,34,68,90,66,54,31,35,17,53,45,44,5,23,34,42,13,89,20,8,54,76,60,48,22,85,15,34,66,68,82,22,83,12,4,41,73,46,15,72,25,10,89,71,65,58,80,59,35,1,33,56,87,30,84} ;
,  {"44 ",SToD("20220412"),61,44,50,41,30,68,4,47,25,78,1,35,2,53,69,90,73,71,82,81,39,21,72,47,38,58,16,86,25,39,5,33,27,53,54,18,20,69,25,78,25,50,41,69,36,10,43,40,82,88,27,17,66,60,34} ;
,  {"45 ",SToD("20220414"),54,72,12,85,58,83,61,41,53,55,87,48,54,49,64,25,42,75,62,43,6,64,8,61,26,71,70,50,54,17,12,41,54,72,80,89,32,80,8,75,22,49,41,5,64,78,8,56,74,14,50,54,56,78,30} ;
,  {"46 ",SToD("20220416"),47,90,39,40,81,16,81,58,67,71,72,30,8,3,88,2,18,15,26,90,3,89,37,2,21,30,14,62,76,2,29,60,14,64,85,5,1,19,18,87,81,61,52,76,31,16,81,87,19,2,18,83,89,75,68} ;
,  {"47 ",SToD("20220419"),36,56,61,73,86,22,85,54,87,26,54,88,61,3,38,23,19,78,15,53,53,20,31,58,65,45,68,18,32,74,76,4,52,30,1,58,51,49,15,2,12,7,22,17,39,27,18,25,66,33,61,81,62,55,26} ;
,  {"48 ",SToD("20220421"),37,14,7,62,49,46,28,76,81,85,51,75,32,21,19,23,11,27,80,67,46,35,23,9,69,83,27,82,2,39,56,38,87,83,29,83,77,44,23,65,44,19,8,62,22,8,84,32,53,35,35,79,27,90,70} ;
,  {"49 ",SToD("20220423"),82,90,20,9,28,47,66,48,68,39,53,17,34,41,22,20,76,53,78,33,30,10,5,75,69,45,54,7,16,83,23,86,24,72,70,85,31,54,10,65,59,19,17,67,38,81,77,34,62,90,1,58,78,4,55} ;
,  {"50 ",SToD("20220426"),58,88,86,50,53,55,13,46,41,11,1,9,52,47,45,7,82,29,70,78,90,40,64,1,31,74,82,33,52,36,54,3,50,32,28,51,3,38,70,32,61,17,52,24,47,86,2,42,59,4,78,87,73,86,9} ;
,  {"51 ",SToD("20220428"),10,85,30,17,50,40,13,14,85,87,68,58,1,53,89,2,17,33,22,20,27,37,38,55,54,51,75,20,78,37,26,59,85,89,88,53,9,84,54,25,41,50,53,22,21,31,24,16,4,27,7,73,5,16,68} ;
,  {"52 ",SToD("20220430"),47,15,76,12,90,42,53,2,20,79,78,75,24,85,67,9,2,37,17,86,65,87,25,81,39,65,85,62,35,66,64,28,55,18,76,5,49,25,24,74,73,16,82,78,80,64,51,11,21,86,25,17,14,70,86} ;
,  {"53 ",SToD("20220503"),80,69,84,73,50,72,62,67,82,9,66,17,7,38,46,37,64,90,88,67,80,72,1,63,18,46,18,83,34,25,35,34,9,76,51,90,54,76,80,71,12,43,22,71,5,38,5,35,66,6,8,12,54,63,80} ;
,  {"54 ",SToD("20220505"),67,48,16,42,87,73,66,61,6,88,39,30,4,78,38,33,67,12,78,6,11,47,37,16,81,32,4,51,25,38,37,16,80,86,8,5,45,21,47,76,27,15,6,25,71,71,86,22,60,50,36,8,24,29,20} ;
,  {"55 ",SToD("20220507"),34,82,52,53,45,74,39,62,12,86,29,14,42,89,52,25,46,90,82,65,57,72,38,29,86,75,63,13,48,69,1,31,15,68,52,31,51,7,90,52,54,28,23,80,31,21,57,54,83,38,28,26,30,55,64} ;
,  {"56 ",SToD("20220510"),49,77,90,85,14,43,55,80,37,22,74,41,89,65,11,76,58,72,49,85,50,33,36,19,74,26,16,47,73,21,67,69,16,37,20,79,72,30,10,58,59,56,55,47,40,69,78,70,30,8,41,45,44,37,18} ;
,  {"57 ",SToD("20220512"),51,26,88,69,60,22,43,14,38,60,25,41,60,57,42,17,3,32,53,63,62,46,3,61,84,22,42,24,52,90,60,41,33,78,18,80,8,25,37,53,4,49,46,38,28,42,9,45,44,79,89,30,58,52,90} ;
,  {"58 ",SToD("20220514"),47,44,62,8,86,64,84,44,20,88,71,63,73,66,59,48,50,5,46,2,49,13,4,69,62,64,11,21,19,48,22,81,31,55,53,9,40,56,33,70,48,41,8,26,85,87,77,19,5,14,73,52,58,66,90} ;
,  {"59 ",SToD("20220517"),16,31,30,50,81,14,4,24,61,87,38,5,28,33,39,80,22,58,35,88,23,72,9,5,1,85,71,82,1,39,50,23,78,39,35,74,83,32,90,1,51,8,59,25,23,21,83,28,62,4,51,31,67,54,62} ;
,  {"60 ",SToD("20220519"),32,21,59,44,90,10,25,53,67,17,7,57,11,1,60,29,51,41,56,48,86,41,37,30,26,33,54,78,41,19,23,13,6,81,56,4,14,61,17,47,3,42,34,69,59,89,13,38,74,65,53,35,85,72,82} ;
,  {"61 ",SToD("20220521"),42,28,73,64,30,48,20,7,34,67,36,27,79,50,87,78,19,87,39,27,84,7,83,66,9,88,8,61,42,26,76,70,56,25,65,66,7,88,1,24,33,21,49,47,22,88,11,65,69,37,38,31,27,22,14} ;
,  {"62 ",SToD("20220524"),81,36,72,84,40,8,80,43,67,64,20,90,58,80,51,40,53,80,62,41,74,62,22,63,35,54,77,76,78,21,50,56,72,42,64,9,88,85,65,6,86,59,21,55,54,77,63,8,10,58,45,79,87,84,72} ;
,  {"63 ",SToD("20220526"),89,58,55,31,67,1,88,79,80,59,47,4,41,62,65,67,7,5,46,44,57,43,64,58,17,56,79,14,37,90,53,37,39,24,86,32,7,18,57,44,64,44,31,70,20,86,67,64,58,22,17,47,77,1,6} ;
}
 

Perhaph is wrong the codeblock bBlock

Function test()
local aDatadbf:=aData_array()
local number,nRecord
local nDelay

number:=89 // delay must be 24

? Rit( aDataDbf, number, 1, nrecord )
return nil

Function Rit( aData, numero, nWheel,nRecord )
local nCount := 0
local nPos1,nPos2,nPos3,nPos4,nPos5
local bBlock

nPos1 := ( nWheel - 1 ) * 5 + 3
nPos2 := ( nWheel - 1 ) * 5 + 4
nPos3 := ( nWheel - 1 ) * 5 + 5
nPos4 := ( nWheel - 1 ) * 5 + 6
nPos5 := ( nWheel - 1 ) * 5 + 7

bBlock:= { |a| If( a[ nPos1 ] = numero .or. ;
a[ nPos2 ] = numero .or. ;
a[ nPos3 ] = numero .or. ;
a[ nPos4 ] = numero .or. ;
a[ nPos5 ] = numero , , nCount++ ) }


FW_RAEval( aData, bBlock, nRecord-1 )



return nCount

[Otto]

Dear Antonio,
I do not understand the return value.

Best regards,
Otto

Code: Select all  Expand view

function FW_RAEval( aArray, bBlock, nStart, nCount )

   local nPos  := IfNil( nStart, Len( aArray ) )

   RAScan( aArray, { |u| Eval( bBlock, u, nPos ), nPos--, .f. }, nStart, nCount )

return aArray

[Silvio.Falconi]

also I ++