FiveTech Software tech support forums

by **Silvio** » Sun Jul 27, 2008 4:56 pm

I think to insert two button instead of vscroll
and into the header of this control can be a TiTle and two buttons as :

@ 6, 2 BITMAP ::oBtnLeft SIZE 8, 11 OF Self NOBORDER
::oBtnLeft:hBitmap := ArrowLeft()
::oBtnLeft:lTransparent := .t.
::oBtnLeft:bLClicked :=......

@ 6, 14 BITMAP ::oBtnRight SIZE 8, 11 OF Self NOBORDER
::oBtnRight:hBitmap := ArrowRight()
::oBtnRight:lTransparent := .t.
::oBtnRight:bLClicked := ....

the functions
ArrowLeft()
ArrowRight()
load window predefined bitmaps

by **Otto** » Sun Jul 27, 2008 7:01 pm

Silvio,
Could you please post your suggestions now all in a working sample.

Thanks in advance
Otto

by **xProgrammer** » Sun Jul 27, 2008 11:40 pm

Hi Otto, Silvio

I am working on a different Calendar control because my needs are different (only want 2 months, and only want to pick single days) and I need it to run with FiveLinux so don't have ready made access to all the "cute" GUI options.

But the aim, I think, should be to end up with a class that can be used pretty much like a TGet, TWBrowse, TRadMenu or whatever on any window or dialog which is where Silvio is headed. But if you are ever only going to use the calendar in one place in one program then the effort would outweigh the advantages.

Just my thoughts
Doug
(xProgrammer)

by **quique** » Mon Jul 28, 2008 12:17 am

Otto, I think the two scrolls are good, vertical to skip month to month and horizontal to skip year to year. One doesn't replace the other.

xProgrammer, I think if this calendar is like you need, it can be configurable, a DATA with the number of months that you want to show, a DATA to indicate if is possible to change with scrollbar and a DATA to indicate if is possible to pick a range of days or one day. Well I only thinking on the air, after all, the difficult thing already is done.

by **xProgrammer** » Mon Jul 28, 2008 12:40 am

Hi Quique

Good thinking but I want different layout and logic is very simple for what I want using buttons. I wrote an HTML / JavaScript version some time ago so what little logic is required is all there, it just needs to be translated.

But I am watching this thread with great interest.

One possible feature to think about is if you want the days on the calendar to reflect some status value. In my case not all sites are open on all days so ability to show on calendar which days a site is open would be good. For a booking system in other scenarios it might be good to indicate on which days there are no vacancies etc.

Regards
Doug
(xProgrammer)

by **Antonio Linares** » Mon Jul 28, 2008 9:02 am

Dear Otto, Silvio and others,

Lets do it right :-)

I am reviewing your code and there are many mistakes in it. So my only intention is that you get a clear understanding on building user defined new controls.

Lets focus on Method Paint() by now. Lets forget about the rest for now. We will go for functionality once the painting is ok and stable

Code: Select all Expand view: #include "FiveWin.ch" //----------------------------------------------------------------------------// function Main() local oWnd, oPickDate DEFINE WINDOW oWnd TITLE "Calendar" oPickDate := TPickDate():New( 10, 10,,, oWnd ) ACTIVATE WINDOW oWnd return nil //----------------------------------------------------------------------------// CLASS TPickDate FROM TControl DATA nStartRow, nStartCols DATA oPlanFont, sy, sx DATA ClickRow, syTemp, sxTemp, ClickCol DATA StartDay, EndDay, oBrush DATA hBru, hPen1, hPen3 DATA lMove AS LOGIC INIT .F. DATA aPlan AS ARRAY INIT {} DATA aTemp AS ARRAY INIT {} DATA nStartZeile INIT 0 DATA nVersion DATA nYear DATA lBorder DATA hPen CLASSDATA lRegistered AS LOGICAL METHOD New( nTop, nLeft, nWidth, nHeight, oWnd, nYear, lBorder, oPlanFont, nClrFore, nClrBack, nVersion ) METHOD Initiate( hDlg ) INLINE Super:Initiate( hDlg ), ::Default() METHOD Paint() METHOD Display() INLINE ::BeginPaint(), ::Paint(), ::EndPaint(), 0 METHOD SelectPen( hPen ) INLINE SelectObject( ::hDC, hPen ) METHOD End() INLINE ::Destroy() METHOD Destroy() METHOD LButtonUp( nRow, nCol, nKeyFlags ) METHOD Ldblclick( nRow, nCol, nKeyFlags ) // METHOD MouseMove( nRow, nCol, nKeyFlags ) METHOD PreviousYear() METHOD NextYear() METHOD EraseBkGnd( hDC ) INLINE 0 ENDCLASS //----------------------------------------------------------------------------// METHOD New( nTop, nLeft, nWidth, nHeight, oWnd, nYear, lBorder, oPlanFont, nClrFore,; nClrBack, nVersion ) CLASS TPickDate DEFAULT nWidth := 800,; nHeight := 300,; nLeft := 0,; nTop := 0,; nYear := Year( Date() ),; nVersion := "1.0.0",; oWnd := GetWndDefault(),; lBorder := .T. ::nTop = nTop ::nLeft = nLeft ::nBottom = nTop + nHeight - 1 ::nRight = nLeft + nWidth - 1 ::nStartCols := nLeft ::nStartRow := nTop ::nYear := nYear ::lBorder := lBorder ::nStyle = nOr( WS_CHILD, WS_VISIBLE, WS_TABSTOP, WS_BORDER ) ::oWnd := oWnd if ::oPlanFont == nil DEFINE FONT ::oPlanFont NAME "ARIAL" SIZE 0,-11 else ::oPlanFont := oPlanFont endif ::nClrText = nClrFore ::nClrPane = nClrBack ::sy := 1 ::sx := 1 ::syTemp := 0 ::sxTemp := 0 ::aPlan := {} ::ClickCol := 0 ::ClickRow := 0 ::startDay := "" ::endDay := "" ::lMove := .f. ::aTemp := {} ::nStartZeile := 0 AAdd( ::aTemp, { 0, 0 } ) // 1 AAdd( ::aTemp, { 0, 0 } ) // 2 AAdd( ::aTemp, { 0, 0 } ) // 3 AAdd( ::aTemp, { 0, 0 } ) // 4 AAdd( ::aTemp, { 0, 0 } ) // 5 AAdd( ::aTemp, { 0, 0 } ) // 6 AAdd( ::aTemp, { 0, 0 } ) // 7 AAdd( ::aTemp, { 0, 0 } ) // 8 AAdd( ::aTemp, { 0, 0 } ) // 9 AAdd( ::aTemp, { 0, 0 } ) // 10 AAdd( ::aTemp, { 0, 0 } ) // 11 AAdd( ::aTemp, { 0, 0 } ) // 12 #ifdef __XPP__ DEFAULT ::lRegistered := .f. #endif ::Register( nOR( CS_VREDRAW, CS_HREDRAW ) ) if ! Empty( oWnd:hWnd ) ::Create() oWnd:AddControl( Self ) else oWnd:DefControl( Self ) endif return self //----------------------------------------------------------------------------// METHOD Paint() CLASS TPickDate local aInfo := ::DispBegin(), hPen, hOld, oFont, nStep, n FillRect( ::hDC, GetClientRect( ::hWnd ), ::oBrush:hBrush ) hPen = CreatePen( PS_SOLID, 1, CLR_BLACK ) hOld = SelectObject( ::hDC, hPen ) DEFINE FONT oFont NAME "Tahoma" SIZE 0, -12 nStep = ::nHeight / 13 for n = 1 to 12 ::Line( n * nStep, 0, n * nStep, ::nWidth - 1 ) ::Say( n * nStep + 4, 3, cMonth( CToD( Str( n, 2 ) + "/01/" + Str( Year( Date() ), 4 ) ) ),,, oFont, .T. ) next nStep = ( ::nWidth - 60 ) / 36 for n = 1 to 35 ::Line( 0, 60 + ( nStep * n ), ::nHeight - 1, 60 + ( nStep * n ) ) ::Say( 4, 60 + ( nStep * n ), SubStr( CDoW( CToD( Str( n, 2 ) + "/01/" + Str( Year( Date() ), 4 ) ) ), 1, 2 ),,, oFont, .T. ) next SelectObject( ::hDC, hOld ) DeleteObject( hPen ) ::DispEnd( aInfo ) return 0 //----------------------------------------------------------------------------// METHOD LButtonUp( nRow, nCol, nKeyFlags ) CLASS TPickDate ::endDay := ::aPlan[::sx,::sy] IF ::sy > 0 .AND. ::sx > 0 if msgYesNo(::startDay + " -- " + ::endDay + " Tage: " +; str( ctod(::endDay)-ctod(::startDay) +1 ))=.t. endif ENDIF ::lMove:=.f. return nil //----------------------------------------------------------------------------// METHOD Ldblclick( nRow, nCol, nKeyFlags ) CLASS TPickDate local ITemp := 0 ::sx := INT((nRow - ::nStartRow)/::nHeight ) + 1 ::sy := INT((nCol - ::nStartCols)/::nWidth ) IF ::sy > 0 .AND. ::sx > 0 ::startDay := ::aPlan[::sx,::sy] ::nStartZeile := ::sx ::ClickRow := (INT((nRow-::nStartRow)/::nHeight ))*::nHeight + ::nStartRow ::ClickCol := ::nStartCols + ::sy * ::nWidth FOR ITemp := 1 TO 12 ::aTemp[ITemp,1]:=0 NEXT sysrefresh() ::lMove:=.t. ENDIF Super:LDblClick( nRow, nCol, nKeyFlags ) return nil //----------------------------------------------------------------------------// /* METHOD MouseMove( nRow, nCol, nKeyFlags ) CLASS TPickDate Super:MouseMove( nRow, nCol, nKeyFlags ) if IsOverWnd( ::hWnd, nRow, nCol ) if !::lCaptured ::Capture() endif else if !::lCaptured ReleaseCapture() endif ENDIF if ::lMove IF ::sx <> (INT((nRow-::nStartRow)/::nHeight ) + 1) .OR.; ::sx <> (INT((nCol-::nStartCols )/::nHeight ) + 1 ) ::sx := INT((nRow-::nStartRow)/::nHeight ) + 1 ::sy := INT((nCol -::nStartCols )/::nWidth ) IF nRow < ::nStartRow ::sx := 0 nRow := 0 ENDIF ::sxTemp := ::nStartRow + ::sx * ::nHeight ::syTemp := ::nStartCols + ::sy * ::nWidth + ::nWidth ENDIF endif return nil */ //-----------------------------------------------------------------// METHOD Destroy() CLASS TPickDate RELEASE FONT ::oplanFont ::hBru:end() ::hPen:end() ::hPen1:end() ::hPen3:end() return nil //-----------------------------------------------------------------// method PreviousYear() CLASS TPickDate ::nYear := ::nYear - 1 ::Paint() *::oWnd:refresh() ::oWnd:cTitle := "Kalender [ " + str(::nYear,4) + " ]" return .T. //-----------------------------------------------------------------// method NextYear() CLASS TPickDate ::nYear := ::nYear + 1 ::Paint() *::oWnd:refresh() ::oWnd:cTitle := "Kalender [ " + str(::nYear,4) + " ]" return .T. //-----------------------------------------------------------------//

by **Antonio Linares** » Mon Jul 28, 2008 9:47 am

Lets add this line at the beginning, so we can check how the control resizes:

Code: Select all Expand view: #include "FiveWin.ch" //----------------------------------------------------------------------------// function Main() local oWnd, oPickDate DEFINE WINDOW oWnd TITLE "Calendar" oPickDate := TPickDate():New( 10, 10,,, oWnd ) oWnd:oClient = oPickDate // here! ACTIVATE WINDOW oWnd return nil

Now resize the main window and the control will resize to fit the window area

by **Antonio Linares** » Mon Jul 28, 2008 10:10 am

Just working on the painting for now:

Code: Select all Expand view: METHOD Paint() CLASS TPickDate local aInfo := ::DispBegin(), hPen, hOld, oFont, nRowStep, nColStep, n FillRect( ::hDC, GetClientRect( ::hWnd ), ::oBrush:hBrush ) hPen = CreatePen( PS_SOLID, 1, CLR_BLACK ) hOld = SelectObject( ::hDC, hPen ) DEFINE FONT oFont NAME "Tahoma" SIZE 0, -12 nRowStep = ::nHeight / 13 for n = 1 to 12 ::Line( n * nRowStep, 0, n * nRowStep, ::nWidth - 1 ) ::Say( n * nRowStep + ( nRowStep * 0.3 ), 3, cMonth( CToD( Str( n, 2 ) + "/01/" + Str( Year( Date() ), 4 ) ) ),,, oFont, .T. ) next nColStep = ( ::nWidth - 60 ) / 36 for n = 1 to 35 ::Line( 0, 60 + ( nColStep * n ), ::nHeight - 1, 60 + ( nColStep * n ) ) ::Say( nRowStep * 0.5, 60 - 3 + ( nColStep * n ) + ( nColStep * 0.3 ),; SubStr( CDoW( CToD( "01/" + Str( n, 2 ) + "/" + Str( Year( Date() ), 4 ) ) ), 1, 2 ),,, oFont, .T. ) next SelectObject( ::hDC, hOld ) DeleteObject( hPen ) ::DispEnd( aInfo ) return 0

by **Otto** » Mon Jul 28, 2008 10:24 am

Hello Antonio,

thank you very much for your response.

It was Silvios idea to make a “User defined new control”.

I only made pickdate first as a function and then I tried to make a class but not a new control.
I am not that skilled.

The thing I shared is the use of an array I mean to fill the array and to know from the coordinates of the mouse move which day the mouse is over and in which column to position the first day of a month.
This part I think is not that bad.

I would be very happy if you assist to make a real user defined class. We could learn much practicing on that sample.

Could you please post some information what

CLASSDATA lRegistered AS LOGICAL
does exactly.

-----
One question about the use of oFont.
Should oFont not be released or declared as DATA od static?

Regards,
Otto

by **Antonio Linares** » Mon Jul 28, 2008 11:06 am

Otto,

> This part I think is not that bad.

I am sure there is a lot of valuable code in there. I am just reviewing the user defined control Class implementation for now. Silvio's proposal to create a new control Class is the way to go.

> CLASSDATA lRegistered AS LOGICAL

It is needed for new control Classes that are not Windows estandard. Windows API requires to "register" a control class name. It has to be registered only once. That DATA controls that. Estandard Window classes are already "registered" by Windows itself.

>
One question about the use of oFont.
Should oFont not be released or declared as DATA od static?
>

It should be used as a DATA. I am just doing a quick painting test that needs to be improved.

by **mmercado** » Mon Jul 28, 2008 11:12 am

Otto wrote:It was Silvios idea to make a “User defined new control”

Why a new class?

Why not just adaptate the Otto's routine or mine (CalAnual posted at spanish forum) for working with a browser (TXBrowse or TSBrowse) and take advantage of all the procedural and graphical facilities that browsers already have?

It's my point of view, regards.

Manuel Mercado.

by **Antonio Linares** » Mon Jul 28, 2008 11:19 am

Still just focused on painting:

Code: Select all Expand view: #include "FiveWin.ch" //----------------------------------------------------------------------------// function Main() local oWnd, oPickDate DEFINE WINDOW oWnd TITLE "Calendar" oPickDate := TPickDate():New( 10, 10,,, oWnd ) oWnd:oClient = oPickDate ACTIVATE WINDOW oWnd MAXIMIZED return nil //----------------------------------------------------------------------------// CLASS TPickDate FROM TControl DATA nStartRow, nStartCols DATA oPlanFont, sy, sx DATA ClickRow, syTemp, sxTemp, ClickCol DATA StartDay, EndDay, oBrush DATA hBru, hPen1, hPen3 DATA lMove AS LOGIC INIT .F. DATA aPlan AS ARRAY INIT {} DATA aTemp AS ARRAY INIT {} DATA nStartZeile INIT 0 DATA nVersion DATA nYear DATA lBorder DATA hPen CLASSDATA lRegistered AS LOGICAL METHOD New( nTop, nLeft, nWidth, nHeight, oWnd, nYear, lBorder, oPlanFont, nClrFore, nClrBack, nVersion ) METHOD Initiate( hDlg ) INLINE Super:Initiate( hDlg ), ::Default() METHOD Paint() METHOD Display() INLINE ::BeginPaint(), ::Paint(), ::EndPaint(), 0 METHOD SelectPen( hPen ) INLINE SelectObject( ::hDC, hPen ) METHOD End() INLINE ::Destroy() METHOD Destroy() METHOD LButtonUp( nRow, nCol, nKeyFlags ) METHOD Ldblclick( nRow, nCol, nKeyFlags ) // METHOD MouseMove( nRow, nCol, nKeyFlags ) METHOD PreviousYear() METHOD NextYear() METHOD EraseBkGnd( hDC ) INLINE 0 ENDCLASS //----------------------------------------------------------------------------// METHOD New( nTop, nLeft, nWidth, nHeight, oWnd, nYear, lBorder, oPlanFont, nClrFore,; nClrBack, nVersion ) CLASS TPickDate DEFAULT nWidth := 800,; nHeight := 300,; nLeft := 0,; nTop := 0,; nYear := Year( Date() ),; nVersion := "1.0.0",; oWnd := GetWndDefault(),; lBorder := .T. ::nTop = nTop ::nLeft = nLeft ::nBottom = nTop + nHeight - 1 ::nRight = nLeft + nWidth - 1 ::nStartCols := nLeft ::nStartRow := nTop ::nYear := nYear ::lBorder := lBorder ::nStyle = nOr( WS_CHILD, WS_VISIBLE, WS_TABSTOP, WS_BORDER ) ::oWnd := oWnd if ::oPlanFont == nil DEFINE FONT ::oPlanFont NAME "ARIAL" SIZE 0,-11 else ::oPlanFont := oPlanFont endif ::nClrText = nClrFore ::nClrPane = nClrBack ::sy := 1 ::sx := 1 ::syTemp := 0 ::sxTemp := 0 ::aPlan := {} ::ClickCol := 0 ::ClickRow := 0 ::startDay := "" ::endDay := "" ::lMove := .f. ::aTemp := {} ::nStartZeile := 0 AAdd( ::aTemp, { 0, 0 } ) // 1 AAdd( ::aTemp, { 0, 0 } ) // 2 AAdd( ::aTemp, { 0, 0 } ) // 3 AAdd( ::aTemp, { 0, 0 } ) // 4 AAdd( ::aTemp, { 0, 0 } ) // 5 AAdd( ::aTemp, { 0, 0 } ) // 6 AAdd( ::aTemp, { 0, 0 } ) // 7 AAdd( ::aTemp, { 0, 0 } ) // 8 AAdd( ::aTemp, { 0, 0 } ) // 9 AAdd( ::aTemp, { 0, 0 } ) // 10 AAdd( ::aTemp, { 0, 0 } ) // 11 AAdd( ::aTemp, { 0, 0 } ) // 12 #ifdef __XPP__ DEFAULT ::lRegistered := .f. #endif ::Register( nOR( CS_VREDRAW, CS_HREDRAW ) ) if ! Empty( oWnd:hWnd ) ::Create() oWnd:AddControl( Self ) else oWnd:DefControl( Self ) endif return self //----------------------------------------------------------------------------// METHOD Paint() CLASS TPickDate local aInfo := ::DispBegin(), hPen, hOld, oFont, nRowStep, nColStep, n, dDate local hDC := ::hDC, cDay FillRect( hDC, GetClientRect( ::hWnd ), ::oBrush:hBrush ) hPen = CreatePen( PS_SOLID, 1, CLR_BLACK ) hOld = SelectObject( hDC, hPen ) DEFINE FONT oFont NAME "Tahoma" SIZE 0, -12 nRowStep = ::nHeight / 13 for n = 1 to 12 ::Line( n * nRowStep, 0, n * nRowStep, ::nWidth - 1 ) ::Say( n * nRowStep + ( nRowStep * 0.3 ), 3, cMonth( CToD( Str( n, 2 ) + "/01/" + Str( Year( Date() ), 4 ) ) ),,, oFont, .T. ) next dDate = CToD( "06/01/2008" ) nColStep = ( ::nWidth - 60 ) / 36 for n = 1 to 35 ::Line( 0, 60 + ( nColStep * n ), ::nHeight - 1, 60 + ( nColStep * n ) ) cDay = SubStr( CDoW( dDate++ ), 1, 2 ) ::Say( nRowStep * 0.5,; 60 + ( nColStep * n ) + ( nColStep / 2 ) - ( GetTextWidth( hDC, cDay, oFont:hFont ) / 2 ) + 1,; cDay,,, oFont, .T. ) next SelectObject( hDC, hOld ) DeleteObject( hPen ) ::DispEnd( aInfo ) return 0 //----------------------------------------------------------------------------// METHOD LButtonUp( nRow, nCol, nKeyFlags ) CLASS TPickDate ::endDay := ::aPlan[::sx,::sy] IF ::sy > 0 .AND. ::sx > 0 if msgYesNo(::startDay + " -- " + ::endDay + " Tage: " +; str( ctod(::endDay)-ctod(::startDay) +1 ))=.t. endif ENDIF ::lMove:=.f. return nil //----------------------------------------------------------------------------// METHOD Ldblclick( nRow, nCol, nKeyFlags ) CLASS TPickDate local ITemp := 0 ::sx := INT((nRow - ::nStartRow)/::nHeight ) + 1 ::sy := INT((nCol - ::nStartCols)/::nWidth ) IF ::sy > 0 .AND. ::sx > 0 ::startDay := ::aPlan[::sx,::sy] ::nStartZeile := ::sx ::ClickRow := (INT((nRow-::nStartRow)/::nHeight ))*::nHeight + ::nStartRow ::ClickCol := ::nStartCols + ::sy * ::nWidth FOR ITemp := 1 TO 12 ::aTemp[ITemp,1]:=0 NEXT sysrefresh() ::lMove:=.t. ENDIF Super:LDblClick( nRow, nCol, nKeyFlags ) return nil //----------------------------------------------------------------------------// /* METHOD MouseMove( nRow, nCol, nKeyFlags ) CLASS TPickDate Super:MouseMove( nRow, nCol, nKeyFlags ) if IsOverWnd( ::hWnd, nRow, nCol ) if !::lCaptured ::Capture() endif else if !::lCaptured ReleaseCapture() endif ENDIF if ::lMove IF ::sx <> (INT((nRow-::nStartRow)/::nHeight ) + 1) .OR.; ::sx <> (INT((nCol-::nStartCols )/::nHeight ) + 1 ) ::sx := INT((nRow-::nStartRow)/::nHeight ) + 1 ::sy := INT((nCol -::nStartCols )/::nWidth ) IF nRow < ::nStartRow ::sx := 0 nRow := 0 ENDIF ::sxTemp := ::nStartRow + ::sx * ::nHeight ::syTemp := ::nStartCols + ::sy * ::nWidth + ::nWidth ENDIF endif return nil */ //-----------------------------------------------------------------// METHOD Destroy() CLASS TPickDate RELEASE FONT ::oplanFont ::hBru:end() ::hPen:end() ::hPen1:end() ::hPen3:end() return nil //-----------------------------------------------------------------// method PreviousYear() CLASS TPickDate ::nYear := ::nYear - 1 ::Paint() *::oWnd:refresh() ::oWnd:cTitle := "Kalender [ " + str(::nYear,4) + " ]" return .T. //-----------------------------------------------------------------// method NextYear() CLASS TPickDate ::nYear := ::nYear + 1 ::Paint() *::oWnd:refresh() ::oWnd:cTitle := "Kalender [ " + str(::nYear,4) + " ]" return .T. //-----------------------------------------------------------------//

by **Antonio Linares** » Mon Jul 28, 2008 11:41 am

Manuel,

Yes, you are right, a browse could be used for this purpose.

But I see it as a good exercise to teach how to build new controls :-)

by **Antonio Linares** » Mon Jul 28, 2008 11:42 am

Code: Select all Expand view: METHOD Paint() CLASS TPickDate local aInfo := ::DispBegin(), hPen, hOld, oFont, nRowStep, nColStep, n, dDate local hDC := ::hDC, cDay, oBrush FillRect( hDC, GetClientRect( ::hWnd ), ::oBrush:hBrush ) DEFINE BRUSH oBrush COLOR nRGB( 183, 249, 185 ) hPen = CreatePen( PS_SOLID, 1, CLR_BLACK ) hOld = SelectObject( hDC, hPen ) DEFINE FONT oFont NAME "Tahoma" SIZE 0, -12 nRowStep = ::nHeight / 13 for n = 1 to 12 ::Line( n * nRowStep, 0, n * nRowStep, ::nWidth - 1 ) ::Say( n * nRowStep + ( nRowStep / 2 ) - ( oFont:nHeight / 2 ), 3, cMonth( CToD( Str( n, 2 ) + "/01/" + Str( Year( Date() ), 4 ) ) ),,, oFont, .T. ) next dDate = CToD( "06/01/2008" ) nColStep = ( ::nWidth - 60 ) / 36 for n = 1 to 35 step 7 FillRect( hDC, { 0, 60 + ( nColStep * n ), ::nHeight - 1, 60 + ( nColStep * ( n + 1 ) ) }, oBrush:hBrush ) next for n = 1 to 35 ::Line( 0, 60 + ( nColStep * n ), ::nHeight - 1, 60 + ( nColStep * n ) ) cDay = SubStr( CDoW( dDate ), 1, 2 ) ::Say( nRowStep * 0.5,; 60 + ( nColStep * n ) + ( nColStep / 2 ) - ( GetTextWidth( hDC, cDay, oFont:hFont ) / 2 ) + 1,; cDay,, If( DoW( dDate++ ) == 1, nRGB( 128, 233, 176 ),), oFont, .T. ) next SelectObject( hDC, hOld ) DeleteObject( hPen ) ::DispEnd( aInfo ) oBrush:End() return 0

by **xProgrammer** » Mon Jul 28, 2008 12:34 pm

Hi all

I'm doing something much simpler given my needs and it needs to run in FiveLinux. Using TButton. Very basic proof of concept is as follows:

Happy to share code but at this stage its dirty experimental stuff with navigation, links etc yet to come.

Code: Select all Expand view: CLASS CALENDAR DATA aDATEBUTTONS DATA aDOW DATA dAnchorDate DATA iLastBlank DATA iDaysInMonth DATA iStartOfMonth DATA iEndOfMonth METHOD New() CONSTRUCTOR METHOD Show() METHOD HideButtons() ENDCLASS METHOD New() CLASS CALENDAR ::dAnchorDate := DATE() ::aDATEBUTTONS := ARRAY( 37 ) ::aDOW := { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" } Return self METHOD Show() CLASS CALENDAR LOCAL dlg_CALENDAR LOCAL sTitle LOCAL ii LOCAL sLabel LOCAL oGrp sTitle := "Calendar" DEFINE DIALOG dlg_CALENDAR TITLE sTitle SIZE 400, 400 dBOM := BOM( ::dAnchorDate ) ::iStartOfMonth := DOW( dBOM ) ::iLastBlank := ::iStartOfMonth - 1 ::iDaysInMonth := DaysInMonth( MONTH( ::dAnchorDate ), IsLeap( ::dAnchorDate ) ) ::iEndOfMonth := ::iDaysInMonth + ::iLastBlank sLabel := CMONTH( ::dAnchorDate ) + " " + STR( YEAR( ::dAnchorDate ) ) @ 9, 1 GROUP oGrp LABEL sLabel OF dlg_CALENDAR SIZE 370, 250 PIXEL iRow := 120 iCol = 20 FOR ii = -6 TO 37 IF ii > 0 @ iRow, iCol BUTTON ::aDATEBUTTONS[ii] PROMPT "Test" OF dlg_CALENDAR PIXEL SIZE 40, 25 ELSE @ iRow, iCol BUTTON ::aDOW[ii + 7] OF dlg_CALENDAR PIXEL SIZE 40, 25 WHEN .F. ENDIF iCol += 50 IF iCol > 330 iRow += 30 iCol := 20 ENDIF NEXT ACTIVATE DIALOG dlg_CALENDAR ON INIT ::HideButtons() RETURN nil METHOD HideButtons() CLASS CALENDAR FOR ii = 1 TO ::iLastBlank ::aDATEBUTTONS[ii]:Hide() NEXT FOR ii = ::iStartOfMonth TO ::iEndOfMonth ::aDATEBUTTONS[ii]:SetText( ALLTRIM( STR( ii - ::iLastBlank ) ) ) ::aDATEBUTTONS[ii]:Show() NEXT FOR ii = ( ::iEndOfMonth + 1 ) TO 37 ::aDATEBUTTONS[ii]:Hide() NEXT RETURN nil

Above code is not suitable for use yet and doesn't really do anything other than put up a 1 month calendar. But it is pretty simple.

Regards
Doug
(xProgrammer)

FiveTech Software tech support forums

Pickdate

Who is online